{"product_id":"gateway-100x-replacement-battery-37v-2700mah-li-polymer","title":"Gateway 100X Pocket PC Replacement Battery H50B 3.7V 2700mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eGateway 100X Pocket PC — 3.7V Li-Polymer Replacement Battery (H50B)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.7V, 2700mAh lithium-polymer battery replaces the original H50B cell in the Gateway 100X Pocket PC. It fits the 100X handheld PDA directly, restoring power to the unit when the original cell has degraded or failed. Voltage and physical dimensions match the OEM spec — 38.54 × 62.44 × 3.79mm.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eGateway 100X platform fit:\u003c\/strong\u003e\n    The 100X uses a single-cell Li-Polymer pack at 3.7V nominal with a proprietary connector keyed to the H50B form factor. The BMS on this unit expects a specific charge profile — the replacement cell matches that profile so the device charges normally through its cradle or cable.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through charge and discharge on the 100X platform and confirmed the BMS accepted the cell without fault codes. The unit reached full charge voltage and the power management screen reported capacity correctly.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eData sync before battery removal:\u003c\/strong\u003e\n    The Gateway 100X stores open application state and unsaved data in RAM powered directly by the main battery. Remove the battery without syncing first and that data is gone. Run an ActiveSync or direct cable sync to the host PC before pulling the old cell.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the Gateway 100X loses all open data after a battery swap\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe 100X is a RAM-based PDA — the processor, OS state, and any open files live in volatile SRAM that draws power continuously from the main battery. There is no internal backup coin cell to hold that state during a swap. The moment the main cell drops out, RAM loses power and everything not written to flash storage is erased. Sync to a host computer before removal, and restore from that sync after the new battery is seated and charged to at least 3.7V before first boot.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eGateway 100X showing a blank screen after new battery installation\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eA blank screen on first insertion usually means the replacement cell shipped at storage charge — typically around 3.0–3.2V — which is below the minimum boot threshold the 100X BMS enforces. The device will not start a boot sequence at that voltage. Place the unit in its cradle or connect the charge cable and leave it for at least 30 minutes before pressing the power button. Once the cell reaches approximately 3.5V, the boot sequence will proceed normally.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43415946035290,"sku":"BWCS-N10XL-1","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43415946068058,"sku":"BWCS-N10XL-2","price":28.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43415946100826,"sku":"BWCS-N10XL-3","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-N10XL-1.webp?v=1779758396","url":"https:\/\/batteryweb.com\/products\/gateway-100x-replacement-battery-37v-2700mah-li-polymer","provider":"BatteryWeb","version":"1.0","type":"link"}