{"product_id":"ge-moniteur-carescape-dinamap-vc150-replacement-battery-108v-5200mah-li-ion","title":"GE Carescape Dinamap VC150 10.8V Replacement Battery 5200mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eGE Carescape Dinamap VC150 — 10.8V Li-ion Replacement Battery (2067981-027)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 10.8V 5200mAh (56.16Wh) Li-ion battery fits the GE Carescape Dinamap VC150 vital signs monitor. It replaces OEM part numbers 2067981-027, 5835030, M2844, 4M00441A, 110836-O, and 5923790. The VC150 uses this cell pack to sustain blood pressure, SpO2, temperature, and heart rate monitoring during patient transport or when mains power is unavailable.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eVC150 monitor compatibility:\u003c\/strong\u003e\n    The Carescape VC150 platform uses a fixed 10.8V three-cell Li-ion architecture with a dedicated BMS handshake. All listed OEM part numbers share the same connector pinout and communication protocol, so the monitor's power management board recognises this pack without configuration changes.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through the VC150's full charge-discharge sequence and confirmed the BMS negotiated state-of-charge correctly with the monitor's charge IC. Cell balancing completed without fault flags on both the first and second cycles.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePost-installation self-test protocol:\u003c\/strong\u003e\n    After installing this battery, allow the VC150 to complete its full power-on self-test without interruption. The device runs BMS verification at startup — cutting power during this sequence triggers a false battery fault that persists until the next clean reboot.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eVC150 alarming low battery immediately after a confirmed full charge\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe VC150's BMS compares reported cell capacity against a stored OEM chemistry baseline. A new replacement cell hasn't yet built a charge history that the monitor recognises, so the BMS can flag a low-battery alarm even when the pack reads full at the charger. This resolves after one complete charge-discharge cycle. Run the monitor on battery until the device initiates its own low-battery shutdown, then charge to 100% before returning it to clinical use.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eVC150 failing to complete its boot sequence after battery swap\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eIf the pack sat in storage before installation, self-discharge may have pulled cell voltage below the VC150's BMS recovery threshold — typically around 9V for a 10.8V three-cell pack. The monitor detects insufficient voltage during the boot handshake and halts before the home screen loads. Connect to mains power and leave the battery on charge for a minimum of two hours before attempting to power on. Once the charge indicator shows at least 20%, the BMS recovery circuit re-initialises and the boot sequence completes normally.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43381424717914,"sku":"BWCS-GEC150MD-1","price":54.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43381424750682,"sku":"BWCS-GEC150MD-2","price":63.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43381424783450,"sku":"BWCS-GEC150MD-3","price":70.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-GEC150MD-1.webp?v=1778900661","url":"https:\/\/batteryweb.com\/products\/ge-moniteur-carescape-dinamap-vc150-replacement-battery-108v-5200mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}