{"product_id":"ge-tl-2613-replacement-battery-36v-700mah-ni-mh","title":"GE TL-2613 Cordless Phone Replacement Battery 3.6V 700mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eGE TL-2613 Series — 3.6V Ni-MH Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.6V, 700mAh Ni-MH battery replaces the rechargeable pack in GE cordless phone handsets. It fits the TL-2613, TL26413, TL96413, and 86413, along with additional models in the same family. The voltage and cell configuration match the original spec exactly.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTL-2613 family compatibility:\u003c\/strong\u003e\n    These models share the same 3.6V three-cell Ni-MH pack with identical connector orientation and physical footprint. The base station charging circuit expects this voltage range, so swapping within this family works without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through charge and discharge on a TL-series handset. The base station accepted the battery without a charging fault, and the BMS held voltage within the expected range across multiple cycles.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-charge requirement for Ni-MH cordless packs:\u003c\/strong\u003e\n    After installing, seat the handset in the base and leave it for a full 16 hours before first use. Ni-MH cells shipped from storage are partially discharged. Skipping this step limits initial capacity and throws off the base station's charge termination timing.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eTalk time shorter than the original battery after replacement\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eNi-MH cells don't reach rated capacity on the first cycle. The electrochemical pathways in a fresh cell need three to five full charge-discharge cycles before the pack delivers its full 700mAh. If talk time feels short immediately after swapping the battery, that's expected behaviour — not a fault. Run the handset to low battery, return it to the base for a full charge, and repeat for several cycles before drawing conclusions.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBase station showing no charge or error light after battery swap\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eGE base stations use a voltage threshold to confirm a valid battery is seated before starting the charge cycle. A Ni-MH pack that has been in storage can drop below 3.0V, which some bases reject entirely. Remove the handset, wait 30 seconds, and reseat it firmly — full contact on the charging pins sometimes resets the detection. If the error persists, the pack voltage is likely too low; charge the handset using a compatible external charger briefly to bring it above 3.2V, then return it to the base.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43340105384026,"sku":"BWCS-CPB9034-1","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43340105416794,"sku":"BWCS-CPB9034-2","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43340105449562,"sku":"BWCS-CPB9034-3","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-CPB9034-1.webp?v=1778367187","url":"https:\/\/batteryweb.com\/products\/ge-tl-2613-replacement-battery-36v-700mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}