{"product_id":"genio-deluxe-500-replacement-battery-144v-2600mah-li-ion","title":"Genio Deluxe 500 14.4V Replacement Battery 2600mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eGenio Deluxe 500 — 14.4V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 14.4V 2600mAh Li-ion replacement battery for the Genio Deluxe 500 cordless stick vacuum. It slots into the same battery bay as the original and connects to the same charge and discharge circuit. If your Deluxe 500 is cutting out early or no longer holding a charge, this cell replaces the degraded pack.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDeluxe 500 motor circuit:\u003c\/strong\u003e\n    The 14.4V rail powers both the main floor brush motor and the suction motor simultaneously. A replacement cell must match this voltage exactly — lower voltage causes the vacuum to cut out under load before the indicator shows empty.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through charge, discharge, and motor-start cycles on the Deluxe 500 platform. The BMS handled the inrush current on start-up without tripping, and the cell held voltage under continuous suction load.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging habit on the Deluxe 500:\u003c\/strong\u003e\n    Do not leave the vacuum sitting on the charging dock between uses. Continuous dock charging applies a trickle current that degrades Li-ion cells faster than normal use cycles. Charge to full, then remove the vacuum from the dock.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator reaches low\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens when the cell voltage sags under load before the indicator circuit registers a low reading. The indicator measures resting voltage, not load voltage — so a worn or undersized cell can drop below the motor's operating threshold while the indicator still shows mid-charge. A restricted filter makes it worse: the motor draws more current to compensate, pulling the cell voltage down faster. Check the filter first, then check whether the battery voltage reads above 12.5V under load.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor cutting out mid-clean and then recovering after a pause\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a BMS overcurrent trip, not a flat battery. When suction is restricted — blocked filter, full dustbin, or a lodged obstruction — the motor draws sustained current above the BMS trip threshold and the protection circuit cuts the output. The pack recovers once it cools and the BMS resets. Clear any blockage and clean the filter before resuming. If the cutout persists on a clean filter, the original cell's internal resistance has risen enough that normal suction load now triggers the trip — at that point the cell needs replacing.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43428028383322,"sku":"BWCS-EDN620VX-1","price":39.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43428028416090,"sku":"BWCS-EDN620VX-2","price":45.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43428028448858,"sku":"BWCS-EDN620VX-3","price":50.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-EDN620VX-1.webp?v=1779933901","url":"https:\/\/batteryweb.com\/products\/genio-deluxe-500-replacement-battery-144v-2600mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}