{"product_id":"gionee-e7-replacement-battery-38v-2500mah-li-polymer","title":"GIONEE E7 Compatible Battery BL-N2500 3.8V 2500mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eGIONEE E7 \/ Elife E7 — 3.8V Li-Polymer Replacement Battery (BL-N2500)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.8V, 2500mAh Li-Polymer replacement battery for the GIONEE E7 and Elife E7 smartphones. It uses OEM part number BL-N2500 and slots into the same position as the original cell. Capacity is rated at 9.5Wh, matching the stock specification.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eE7 and Elife E7 platform fit:\u003c\/strong\u003e\n    Both variants share the same battery bay dimensions, connector pinout, and BMS handshake protocol. At 73.81 × 54.15 × 4.34 mm, this cell fits either model without modification to the frame or flex cable routing.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through charge and discharge cycles on the E7 platform. The BMS accepted the cell on first connect, protection circuits triggered correctly at low-voltage threshold, and the charge IC stepped through constant-current and constant-voltage phases without fault.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFuel gauge recalibration on first use:\u003c\/strong\u003e\n    On first use after installation, disable fast charging for one complete discharge-charge cycle. This gives the fuel gauge IC time to map the new cell's discharge curve before high-current charging pushes current into an uncalibrated state — preventing erratic percentage readings from the first day.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSudden shutdown at 20–30% on the GIONEE E7 after a cell swap\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe E7's fuel gauge IC retains the discharge curve of the old, degraded cell. When a new cell is installed, the IC miscalculates remaining capacity, and the reported percentage no longer matches actual cell voltage. Under modem or display load, the new cell voltage briefly dips, crossing the hardware cutoff threshold before the gauge shows zero — triggering a sudden shutdown. One full discharge-to-shutdown followed by an uninterrupted charge to 100% lets the coulomb counter reset its baseline. After that cycle, shutdowns at false-high percentages stop.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003ePhone won't power on after the replacement battery sat in storage\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLi-Polymer cells self-discharge during storage. If the BL-N2500 shipped or was stored discharged below approximately 2.5V per cell, the BMS enters lockout mode and blocks all charge current as a protection measure. The phone will not respond to a standard charger in this state. Connect the phone to a low-current USB source — a 5V\/500mA port works better here than a fast charger — and leave it for 20–30 minutes before pressing the power button. The BMS needs a trickle current to recover to the point where normal charging resumes, typically around 3.0V.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43404254412890,"sku":"BWCS-GNE700SL-1","price":26.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43404254445658,"sku":"BWCS-GNE700SL-2","price":30.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43404254478426,"sku":"BWCS-GNE700SL-3","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-GNE700SL-1.webp?v=1779369511","url":"https:\/\/batteryweb.com\/products\/gionee-e7-replacement-battery-38v-2500mah-li-polymer","provider":"BatteryWeb","version":"1.0","type":"link"}