{"product_id":"google-nexus-6-replacement-battery-38v-3200mah-li-polymer","title":"Google Nexus 6 Replacement Battery 3.8V 3200mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eGoogle Nexus 6 — 3.8V Li-Polymer 3200mAh Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.8V, 3200mAh Li-Polymer replacement battery for the Google Nexus 6 smartphone. It fits the 2014 Motorola-made Nexus 6 (XT1100\/XT1103) and restores power when the original cell can no longer hold a usable charge. Capacity is 3200mAh — matching the factory spec.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eNexus 6 fit note:\u003c\/strong\u003e\n    The XT1100 and XT1103 variants share the same battery bay dimensions and connector orientation. This cell measures 106.26 × 71.41 × 3.05mm — within the tolerances the frame was built around. The flex connector seats the same way as the original.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through a full charge-discharge cycle on the Nexus 6 platform. The BMS accepted charge handshake without error, voltage held steady under screen-on and modem load, and the fuel gauge IC tracked state-of-charge without intervention.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-cycle fuel gauge reset:\u003c\/strong\u003e\n    After fitting this battery, disable fast charging and run one complete discharge down to auto-shutdown, then charge to 100% on standard 5V\/1A. This gives the Nexus 6 fuel gauge IC a clean discharge curve to calibrate against before higher current charging begins.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSudden shutdown at 20–30% on the Nexus 6 after a cell swap\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe Nexus 6 uses a coulomb-counter fuel gauge that retains calibration data from the previous cell. When a new cell with a different internal resistance goes in, the old discharge curve no longer maps accurately to the new cell's actual voltage drop. Under heavy load — screen at full brightness, LTE active, or GPS running — the cell voltage dips faster than the gauge predicts. The phone hits the hardware low-voltage cutoff before the OS percentage reaches zero. One full discharge-charge cycle rewrites the calibration data and eliminates most of these early shutdowns.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003ePhone won't power on after the replacement battery sat in storage\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLi-Polymer cells self-discharge in storage. If the voltage drops below roughly 2.5V per cell, the BMS trips a deep-discharge lockout and blocks normal charge current to protect the cell. The Nexus 6 will show no charge indicator and won't boot. Connect to a wall adapter — not a PC USB port — and leave it untouched for 20–30 minutes. The charge IC trickle-charges at a low rate to bring the cell above the BMS recovery threshold, after which normal charging resumes. If the phone still shows no response after 45 minutes on a wall adapter, the cell voltage has dropped too far for recovery.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43404175507546,"sku":"BWCS-MXT110SL-1","price":23.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43404175540314,"sku":"BWCS-MXT110SL-2","price":26.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43404175573082,"sku":"BWCS-MXT110SL-3","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-MXT110SL-1.webp?v=1779369370","url":"https:\/\/batteryweb.com\/products\/google-nexus-6-replacement-battery-38v-3200mah-li-polymer","provider":"BatteryWeb","version":"1.0","type":"link"}