{"product_id":"grundig-d780-replacement-battery-37v-500mah-li-ion","title":"Grundig D780 Li-ion Cordless Phone Replacement Battery 3.7V 500mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eGrundig D780 \/ D780A — 3.7V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.7V 500mAh Li-ion replacement battery for the Grundig D780 and D780A cordless DECT handsets. It slots into the handset battery compartment and restores wireless operation when the original cell has degraded. Voltage and form factor match the original: 44.20 × 29.94 × 4.35mm.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eD780 and D780A compatibility:\u003c\/strong\u003e\n    Both models use the same handset chassis, battery bay dimensions, and 3.7V power rail — one cell covers both variants without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through charge and discharge on a D780 handset. The BMS accepted the pack without fault flags, and the base station showed a normal charge indicator throughout.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-charge protocol for Li-ion cordless handsets:\u003c\/strong\u003e\n    After fitting this battery, seat the handset in the base and leave it on charge for a full cycle before taking a call. Li-ion cells shipped in storage state may read a low voltage that causes the handset display to show a near-empty indicator until the first full charge completes.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the D780 handset shows low battery immediately after fitting a new cell\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eLi-ion cells are stored and shipped at roughly 40–50% charge to protect cell chemistry during transit. When the D780 reads this voltage on boot, it maps it to the lower end of its fuel gauge and displays one or two bars. This is not a fault with the replacement cell. Place the handset in the base, let it charge fully, and the display will recalibrate to show accurate capacity. If the indicator still reads low after a complete charge, check that the base contacts are clean and making firm connection with the handset terminals.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eD780 losing range or dropping calls shortly after a battery swap\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eDECT transmit circuitry draws a short burst of higher current each time the handset communicates with the base. If the replacement cell has a high internal resistance — common in cells that have sat unused for a long time — voltage sags under that RF load and the handset can briefly lose sync with the base. The fix is to run two or three full charge-discharge cycles to condition the cell and lower its internal resistance. After cycling, test the handset at the edge of its normal range; a healthy 3.7V cell should hold above 3.5V under transmit load.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43339916312666,"sku":"BWCS-PHS900CL-1","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43339916345434,"sku":"BWCS-PHS900CL-2","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43339916378202,"sku":"BWCS-PHS900CL-3","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-PHS900CL-1.webp?v=1778366945","url":"https:\/\/batteryweb.com\/products\/grundig-d780-replacement-battery-37v-500mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}