{"product_id":"handheld-dolphin-6100-replacement-battery-37v-3300mah-li-ion","title":"HandHeld Dolphin 6100 Replacement Battery BP06-00028A 3.7V","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eHandHeld Dolphin 6100 \/ 6110 — 3.7V Li-ion Replacement Battery (BP06-00028A)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.7V, 3300mAh lithium-ion pack replaces the OEM battery in the HandHeld Dolphin 6100 and Dolphin 6110 mobile computers. Both terminals use the same battery bay, connector pinout, and BMS handshake protocol, so one SKU covers both models. Voltage and capacity match the original BP06-00028A specification exactly.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDolphin 6100 and 6110 compatibility:\u003c\/strong\u003e\n    Both units share the same chassis depth, locking tab geometry, and three-pin battery interface. The BMS on each model communicates over the same SMBus lines, so the pack authenticates without any firmware workaround or device reset.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through full charge and discharge on a Dolphin 6100 unit. The BMS held the charge curve within 2% of the rated 12.21Wh, and the protection circuit tripped correctly at the low-voltage threshold — no false cutoffs under simulated scan-burst load.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-shift preparation:\u003c\/strong\u003e\n    After installing, seat the scanner in its cradle and run a full charge cycle before the first pick-and-pack shift. The scan trigger draws its highest inrush current when the cell is near minimum charge — starting from a full cell prevents a false BMS low-voltage trip during the first hour of use.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCradle showing a charging error on a freshly installed pack\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNew packs sometimes arrive with surface oxidation on the gold-plated contact pads. That thin layer raises contact resistance enough for the Dolphin cradle's charge controller to flag a fault instead of starting a charge cycle. Wipe the five contacts on the battery face and the matching cradle pins with a dry lint-free cloth, then reseat the scanner firmly until the locking tabs click. If the error clears within 30 seconds, contact resistance was the cause — not a faulty pack or cradle.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eScanner losing wireless connection during a rapid scan burst\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eOn the Dolphin 6100, the 802.11b\/g radio and the scan trigger both draw current at the same moment during a rapid barcode burst. If the cell voltage sags below roughly 3.4V under that combined load, the radio module drops its association before the imager completes the decode. This shows up as missed scans followed by a reconnect delay — not a scanner fault or access-point issue. Keeping the battery above 20% charge before a high-throughput shift eliminates the sag event that triggers the drop.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43324672507994,"sku":"BWCS-HDP610BX-1","price":56.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43324672540762,"sku":"BWCS-HDP610BX-2","price":65.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43324672573530,"sku":"BWCS-HDP610BX-3","price":73.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-HDP610BX-1.webp?v=1778121683","url":"https:\/\/batteryweb.com\/products\/handheld-dolphin-6100-replacement-battery-37v-3300mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}