{"product_id":"handiprinter-6017-replacement-battery-74v-3400mah-li-ion","title":"Handiprinter 6017 Replacement Battery 7.4V 3400mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eHandiprinter 6017 — 7.4V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 7.4V 3400mAh Li-ion battery replaces the original pack in the Handiprinter 6017 portable thermal printer. It fits the compact handheld unit used for mobile document and label printing. Swap it in when the original pack no longer holds a full working charge.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eHandiprinter 6017 fit:\u003c\/strong\u003e\n    The 6017 runs a 7.4V two-cell Li-ion configuration with a BMS that monitors cell balance and current draw from both the thermal print head and the paper feed motor. This pack matches that voltage rail and physical connector, so the BMS handshake completes without error flags.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through print-head heat cycles and paper feed motor draws on the 6017 platform. The BMS held stable under combined thermal head and motor load, with no unexpected cutoffs during multi-page print runs.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-deploy print sequence:\u003c\/strong\u003e\n    After installing, charge the pack fully, then print five test pages before putting the unit into service. The 6017's BMS sets its current profile against real load — the paper feed motor and thermal head need those initial draws to let the BMS calibrate correctly for the new cells.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the 6017 stops printing after sitting unused for weeks\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLi-ion cells self-discharge during storage. If the 6017 has been sitting, the pack voltage may drop below the 6.0V threshold the BMS requires before it will pass current to the thermal head or motor. The printer may power on but refuse to print — the BMS is protecting the cells, not signalling a fault. Plug in and charge for a full cycle before testing; most units recover once the pack reads above 7.0V on the charger output.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003ePrint coming out faded or striped on a charged battery\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe 6017's thermal print head needs a steady voltage to hold the correct temperature across the full print line. When cell capacity has degraded, voltage sags under print-head load even if the battery indicator shows charge remaining. The result is uneven heat distribution — some dots fire correctly, others don't, producing faded lines or horizontal stripes. Fit a fresh pack and run the five-page calibration sequence; if the output sharpens immediately, voltage sag from the old pack was the cause.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43415996825690,"sku":"BWCS-MH6017BX-1","price":41.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43415996858458,"sku":"BWCS-MH6017BX-2","price":47.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43415996891226,"sku":"BWCS-MH6017BX-3","price":52.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-MH6017BX-1.webp?v=1779759079","url":"https:\/\/batteryweb.com\/products\/handiprinter-6017-replacement-battery-74v-3400mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}