{"product_id":"hasee-q130x-replacement-battery-111v-4400mah-li-ion","title":"Hasee Q130X Replacement Battery 11.1V 4400mAh Li-ion","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eHasee Q130X Series — 11.1V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 11.1V, 4400mAh (48.84Wh) Li-ion battery for the Hasee Q130X, Q130C, Q130R, Q130B, and compatible Q130 series notebooks. It replaces cells that have degraded, lost capacity, or stopped holding charge after extended use. Physical dimensions are 203.00 x 50.85 x 39.60mm — verify fitment against your current cell before installing.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eQ130 series compatibility:\u003c\/strong\u003e\n    The Q130X, Q130C, Q130R, and Q130B share the same battery bay dimensions, connector pinout, and voltage rail. The BMS handshake protocol is consistent across this sub-family, so one cell services all listed models without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran full charge and discharge cycles on Q130 series units. The BMS responded correctly at both charge termination and low-voltage cutoff, with no false fault flags during draw.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePost-install calibration on Hasee Q130 series:\u003c\/strong\u003e\n    After fitting the new cell, run one full discharge to hibernate cutoff, then charge uninterrupted to 100%. This forces the BIOS battery learn cycle to reset and clears the inaccurate health warning that commonly appears after a cell swap on this platform.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBIOS reporting battery health as poor immediately after swap\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eWhen you swap a degraded cell for a new one, the BIOS still holds EEPROM data from the old battery. It compares current cell readings against that stored profile and flags a health mismatch. This is a firmware calibration issue, not a fault with the replacement cell. Run one full discharge-to-hibernate, then a full uninterrupted charge to 100% — this overwrites the stale EEPROM values and the health warning clears on the next boot.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eLaptop shutting down at 20–30% charge shown on screen\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens when the fuel gauge IC has not yet calibrated against the new cell's actual discharge curve. The displayed percentage reads incorrectly high while the real cell voltage is already near cutoff. Under combined CPU and display load, the voltage drops sharply — the system shuts down before the gauge catches up. Run two to three full discharge-to-cutoff and full-charge cycles to allow the fuel gauge IC to map the new cell accurately; the shutdowns stop once calibration completes and the gauge tracks actual voltage.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43409664704602,"sku":"BWCS-ADM449NB-1","price":81.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43409664737370,"sku":"BWCS-ADM449NB-2","price":94.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43409664770138,"sku":"BWCS-ADM449NB-3","price":104.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-ADM449NB-1.webp?v=1779580338","url":"https:\/\/batteryweb.com\/products\/hasee-q130x-replacement-battery-111v-4400mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}