{"product_id":"hbc-fub10aa-replacement-battery-6v-2000mah-ni-mh","title":"HBC BA210 Crane Remote Replacement Battery 6V 2000mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eHBC FUB10AA \/ FUB10XL Series — 6V Ni-MH Replacement Battery (BA210)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 6V 2000mAh Ni-MH battery for HBC crane remote controls. It fits the FUB10AA, FUB10XL, FUB78AA, and BA14061 series, along with 14 additional compatible models. OEM part numbers covered include BA210, RHB1220KY, 005-01-00466, BA213020, BA214060, BA214061, and BA213030.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFUB10AA \/ FUB10XL platform fit:\u003c\/strong\u003e\n    These remotes share the same 6V power rail, connector format, and BMS handshake protocol across the FUB series. One battery pack covers the range without modification or adapter.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through full charge and discharge cycles on FUB-series hardware. The BMS accepted the cell without fault codes, and solenoid activation events — which spike inrush current — did not trip the protection circuit at rated capacity.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eMonthly charge during idle periods:\u003c\/strong\u003e\n    HBC crane remotes often sit unused for weeks between jobs. Ni-MH cells self-discharge at roughly 1–3% per day. Leave this battery dormant too long and the cell voltage drops below the charger's detection threshold. Charge it once a month even when the remote is shelved.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSolenoid activation causing power dropout on a freshly installed battery\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eHBC crane remotes fire solenoid or relay outputs during lift commands. That inrush current spike is brief but sharp — it can exceed what a partially charged or storage-voltage cell can deliver without the BMS tripping. If the remote cuts out exactly when you trigger a hoist or travel function, the battery is the first thing to check. A fully charged 6V Ni-MH pack holds enough headroom to absorb those spikes cleanly. Always charge this battery to full before putting the remote back into service.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eRemote showing \"low battery\" immediately after swapping in a new cell\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eA new Ni-MH cell ships at storage voltage — typically 5.4–5.6V for a 6V pack — not at full charge. The FUB10AA firmware reads voltage on boot and flags anything under its low-battery threshold before you even press a button. This is not a faulty battery. Connect the pack to the HBC charger and run a full charge cycle before first use. The low-battery warning should clear once the pack reaches nominal 6V.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43360072892506,"sku":"BWCS-FBA210BL-1","price":66.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43360072925274,"sku":"BWCS-FBA210BL-2","price":76.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43360072958042,"sku":"BWCS-FBA210BL-3","price":84.99,"currency_code":"USD","in_stock":true}],"url":"https:\/\/batteryweb.com\/products\/hbc-fub10aa-replacement-battery-6v-2000mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}