{"product_id":"hilti-sfb105-replacement-battery-96v-3300mah-ni-mh","title":"HILTI SBP10 SFB105 Replacement Battery 9.6V 3300mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eHILTI SFB105 \/ SF100A — 9.6V Ni-MH Replacement Battery (SBP10)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 9.6V Ni-MH battery rated at 3300mAh (31.68Wh), built to replace the original SBP10 pack. It fits the HILTI SFB105 and SF100A cordless drill\/drivers. The connector and terminal layout match the original battery bay directly.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSFB105 and SF100A platform fit:\u003c\/strong\u003e\n    Both models run the same 9.6V rail with the same slide-in terminal block and latch geometry. One battery covers both tools without adapter or modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through full charge and discharge on the SFB105 platform. The BMS held stable through repeated trigger pulls and flagged no overcurrent faults during motor-start inrush testing.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eMotor inrush break-in on first use:\u003c\/strong\u003e\n    On the first two cycles, run the drill at half load — light fastening or low-torque drilling only. This gives the BMS time to profile the inrush current spike before you push it into max-torque or large-bit applications, reducing the chance of a premature overcurrent trip.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBMS Overcurrent Trip on SFB105 Motor-Start Inrush\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eWhen you pull the trigger hard on a fresh or cold pack, the motor draws a short surge of current that can be three to five times the running load. On Ni-MH packs, the BMS sets an overcurrent threshold during the first few discharge cycles — if it hasn't profiled the tool yet, it may interpret that inrush as a fault and cut the output instantly. The result looks like the battery is dead, but it's a protective trip. Releasing the trigger, waiting five seconds, and re-engaging at lower speed usually resets the BMS and lets the cycle complete normally.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eTool Bogs Under Load After Sitting on the Shelf\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eNi-MH cells self-discharge faster than Li-ion — a pack left unused for two to three months can drop to a voltage low enough that the charger won't accept it, or the tool runs noticeably weak even at full trigger. The cells haven't failed; they need a conditioning cycle. Put the pack on the charger for a full uninterrupted charge, then run the tool through one complete discharge at medium load. Voltage should recover to 10.2–10.5V at the terminal after a full charge; anything below 9.6V under light load points to a cell imbalance rather than normal self-discharge.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43416061870170,"sku":"BWCS-HFB100PX-1","price":83.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43416061902938,"sku":"BWCS-HFB100PX-2","price":97.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43416061935706,"sku":"BWCS-HFB100PX-3","price":108.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-HFB100PX-1.webp?v=1779760040","url":"https:\/\/batteryweb.com\/products\/hilti-sfb105-replacement-battery-96v-3300mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}