{"product_id":"hioki-lr8511-replacement-battery-74v-2600mah-li-ion","title":"Hioki LR8511 Z1007 Replacement Battery 7.4V 2600mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eHioki LR8511 \/ LR8510 — 7.4V Li-ion Replacement Battery (Z1007)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 7.4V 2600mAh Li-ion battery replaces the Hioki Z1007 pack in the LR8511 and LR8510 data loggers. These are portable field instruments used for recording electrical measurements across industrial and site environments. The pack slots directly into either unit and meets the original voltage and capacity specifications.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLR8511 and LR8510 compatibility:\u003c\/strong\u003e\n    Both loggers run the same 7.4V battery rail and use the same Z1007 connector and BMS handshake profile. One replacement pack covers either unit without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through charge and discharge cycles on the LR8511 and confirmed the BMS negotiated correctly at startup, held voltage under sustained logging load, and reported state-of-charge accurately to the device display.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-use protocol for field loggers:\u003c\/strong\u003e\n    Before deploying the LR8511 on an extended measurement session, run a full charge cycle from the Hioki charger — not a USB adapter. The logger's BMS calibrates its capacity estimate on the first full charge cycle, and a partial first charge causes the remaining-charge indicator to read low for the life of the pack.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the LR8511 shuts down mid-session with charge still showing\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe LR8511 draws a spike of current each time it writes a large data block to internal memory, especially at high sampling rates. An aged or deeply discharged cell can't sustain voltage through that write spike, so the BMS trips the output to protect the cells before the display reads zero. This looks like an unexpected shutdown even though the battery indicator showed remaining charge. Swapping to a fresh Z1007 pack and doing a full initial charge cycle eliminates this — the new cells hold voltage through the write inrush without triggering the cutoff.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eLR8511 not recognising the new battery on first install\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eIf the logger powers on briefly then shuts down, or displays a battery fault after installing the replacement, the BMS in the new pack may need a wake cycle. Remove the pack, wait 10 seconds, and reinstall it — this resets the BMS communication handshake with the logger. If the fault persists, connect the Hioki charger and allow the pack to reach at least 3.7V per cell (7.4V total) before powering the unit. Most recognition failures clear once the pack crosses that minimum threshold.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43324910960730,"sku":"BWCS-DTX30BX-1","price":38.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43324910993498,"sku":"BWCS-DTX30BX-2","price":44.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43324911026266,"sku":"BWCS-DTX30BX-3","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-DTX30BX-1.webp?v=1778123298","url":"https:\/\/batteryweb.com\/products\/hioki-lr8511-replacement-battery-74v-2600mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}