{"product_id":"hitachi-c-18dl-replacement-battery-18v-3000mah-ni-mh","title":"Hitachi EB 1812S 18V Ni-MH Replacement Battery 3000mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eHitachi C 18DL Series — 18V Ni-MH Replacement Battery (EB 1812S)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is an 18V, 3000mAh Ni-MH replacement battery for the Hitachi C 18DL cordless reciprocating saw and its variants, including the C 18DLX, C 18DMR, and C 6DC. It replaces OEM packs EB 1812S, EB 1814SL, EB 1820L, EB 1824L, EB 1826HL, EB 1830H, EB 1830HL, EB 18B, and EB1820. The pack delivers 54Wh and slots into any tool or charger that accepts the original Hitachi 18V slide-pack form factor.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eC 18DL and C 18DLX series compatibility:\u003c\/strong\u003e\n    These models share the same 18V slide-mount rail, connector pinout, and BMS handshake protocol across the EB 18xx line. Any charger or tool in this family reads this pack without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through full charge and discharge cycles on a C 18DL frame. The BMS held within spec across the inrush spike on trigger pull, and cell temperature stayed stable through sustained cutting loads on wood and steel stock.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBreak-in load cycling on reciprocating saws:\u003c\/strong\u003e\n    On first use, run the saw at moderate stroke speed for two full cycles before pushing maximum cut depth or hard material. This allows the BMS to profile the motor's inrush draw and set overcurrent thresholds accurately before you hit peak load.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBMS cutoff on motor-start inrush during trigger pull\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe C 18DL reciprocating saw pulls a large current spike the instant you squeeze the trigger — this inrush can briefly exceed what the BMS expects from a cold or freshly installed pack. If the BMS has not yet profiled the motor load, it may trip the overcurrent threshold and cut power immediately on trigger engagement. A new pack straight from storage is most vulnerable here because cell voltage sits lower and internal resistance is higher. Running two partial cycles before full-load cuts gives the BMS enough data to stop tripping on a normal start.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eTool bogs under load mid-cut and loses stroke force\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is voltage sag — not a dead battery. Under sustained load through dense timber or steel, the 18V rail drops if contact resistance is high at the slide-pack terminals. Clean the rail contacts on both the tool and the battery with a dry cloth or fine emery strip. After cleaning, check resting voltage with a multimeter — a healthy pack at rest should read at or above 22V on a full Ni-MH charge. If voltage stays below 20V at rest, the cell stack has degraded and the pack needs replacement.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43416085692506,"sku":"BWCS-HTB812PW-1","price":115.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43416085725274,"sku":"BWCS-HTB812PW-2","price":135.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43416085758042,"sku":"BWCS-HTB812PW-3","price":150.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-HTB812PW-1.webp?v=1779760223","url":"https:\/\/batteryweb.com\/products\/hitachi-c-18dl-replacement-battery-18v-3000mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}