{"product_id":"hme-lifepulse-400-replacement-battery-12v-3800mah-ni-mh","title":"HME Lifepulse 400 Replacement Battery 12V 3800mAh EE090243","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eHME Lifepulse 400 — 12V Ni-MH Replacement Battery (EE090243)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 12V, 3800mAh Nickel-Metal Hydride replacement battery for the HME Lifepulse 400 patient monitor. It replaces OEM part EE090243 and fits the Lifepulse 400 directly. The Lifepulse 400 is a portable clinical monitor used for continuous vital sign surveillance when AC power is unavailable.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLifepulse 400 fitment:\u003c\/strong\u003e\n    The Lifepulse 400 uses a 12V Ni-MH cell with a specific BMS handshake tied to the EE090243 part number. This replacement matches that voltage rail and connector geometry so the device recognises the pack and completes its power-on self-test without throwing a battery fault.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through charge and load cycles on the Lifepulse 400 platform. The BMS completed its verification sequence, drew consistent current across the monitoring load profile, and logged no fault codes during startup or sustained operation.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePost-installation self-test protocol:\u003c\/strong\u003e\n    After fitting this battery, let the Lifepulse 400 complete its full power-on self-test without interruption. The device runs a BMS verification routine at startup — cutting power during this sequence causes a false battery fault that persists until the next full reboot cycle.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the Lifepulse 400 alarms low battery immediately after a confirmed full charge\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe Lifepulse 400's charge IC applies conservative acceptance thresholds calibrated to the OEM cell's internal resistance profile. A new replacement cell has a slightly different impedance signature on the first few cycles, so the BMS may read state-of-charge conservatively and trigger a low-battery alarm even at full capacity. This corrects itself after one complete charge-discharge cycle that allows the BMS to re-map the cell's actual voltage curve. Run that conditioning cycle before placing the unit back into clinical rotation.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eLifepulse 400 not completing boot sequence after the battery sat in storage\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNi-MH cells self-discharge at roughly 1–2% per day. A pack stored for several months can drop below the BMS recovery threshold — typically around 10.5V on a 12V Ni-MH pack — and the device will not boot at all. Connect the unit to AC power first and allow the charge IC to bring the cell up from a low state before attempting a battery-only boot. Once voltage climbs above the recovery threshold, the boot sequence completes normally. Check the front-panel charge indicator and wait for it to clear the first charge tier before disconnecting AC.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43381354692698,"sku":"BWCS-HML400MD-1","price":81.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43381354725466,"sku":"BWCS-HML400MD-2","price":95.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43381354758234,"sku":"BWCS-HML400MD-3","price":106.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-HML400MD_1.webp?v=1778900175","url":"https:\/\/batteryweb.com\/products\/hme-lifepulse-400-replacement-battery-12v-3800mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}