{"product_id":"honeywell-bw-rigrat-replacement-battery-37v-10500mah-li-ion","title":"Honeywell BW RigRat 3.7V 10500mAh Compatible Battery","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eHoneywell BW RigRat — 3.7V Li-ion Replacement Battery (500-0165-000)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.7V 10500mAh Li-ion battery replaces the OEM pack in the Honeywell BW RigRat portable multi-gas detector. It fits the RigRat used in confined-space and industrial survey environments where continuous gas monitoring is critical. Capacity is sourced from product data at 10500mAh (38.85Wh) — not estimated from web specs.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBW RigRat platform fit:\u003c\/strong\u003e\n    The RigRat runs its sensor array, display, and wireless telemetry from a single 3.7V cell. This pack matches the OEM voltage rail, connector pinout, and BMS handshake required for the instrument to recognise the battery and report state correctly.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through sensor warm-up sequences and monitored the BMS response at startup. The BMS held steady through the initial sensor current draw without tripping, and charge termination landed within expected bounds at full capacity.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePre-deployment calibration cycle:\u003c\/strong\u003e\n    After fitting this battery, run a full calibration cycle through the RigRat instrument menu before field deployment. The device maps battery state during calibration — skipping this step causes premature low-battery warnings during the first monitoring session even when the pack is fully charged.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBMS lockout after the RigRat sat unused in a carry case for months\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLi-ion cells self-discharge slowly in storage. If the RigRat sat unused long enough, the cell voltage can drop below the BMS protection threshold — typically around 2.5V — and the BMS latches into lockout to prevent cell damage. At that point, the instrument will not power on and the charger may show no activity. Connect the unit to the OEM charger and leave it for at least 60 minutes without interruption; most BMS circuits include a low-voltage recovery path that trickle-charges the cell back above the re-enable threshold before switching to normal charge current. If the charger LED shows activity after 10–15 minutes, the BMS has exited lockout.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSensor readings resetting or dropping out mid-logging session\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is not the same fault as a full shutdown — the instrument stays on but logged data resets or sensor values freeze then restart. The cause is a brief voltage dropout under sustained sensor load: when all gas sensors are actively sampling, current draw peaks and a weakened or partially discharged cell sags below the minimum operating voltage for the sensor electronics. The instrument recovers but the logging buffer clears. Check the battery percentage before starting a long logging session and replace the pack if it reads below 40% — sustained multi-sensor draws will sag a partially depleted cell faster than the display indicator updates.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43360456736858,"sku":"BWCS-HNR200SL-1","price":150.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43360456769626,"sku":"BWCS-HNR200SL-2","price":178.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43360456802394,"sku":"BWCS-HNR200SL-3","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-HNR200SL-1.webp?v=1778615883","url":"https:\/\/batteryweb.com\/products\/honeywell-bw-rigrat-replacement-battery-37v-10500mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}