{"product_id":"honeywell-cv30-replacement-battery-37v-2600mah-li-ion","title":"Honeywell CV30 Barcode Scanner Replacement Battery AB5 3.7V","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eHoneywell CV30 — 3.7V Li-ion Replacement Battery (AB5)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.7V, 2600mAh Li-ion cell replaces the AB5 battery in the Honeywell CV30 handheld barcode scanner. The CV30 is used in retail and warehouse pick-and-pack operations where the scanner runs continuous scan cycles across a full shift. Swap this pack in when the original cell no longer holds charge through a working day.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCV30 platform fit:\u003c\/strong\u003e\n    The CV30 uses a single-cell 3.7V Li-ion pack with a proprietary connector and an onboard BMS that monitors cell voltage and temperature. This replacement matches that voltage rail and connector format so the device firmware recognises the pack at startup.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through repeated scan-trigger and wireless radio loads on the CV30 platform. The BMS held cutoff correctly at low-cell voltage and accepted a full charge cycle through the cradle without throwing a fault.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-shift charging:\u003c\/strong\u003e\n    After installing, seat the scanner in its cradle and run a full charge cycle before starting pick-and-pack. The scan trigger inrush current is highest when the cell sits near minimum charge — a pre-charged pack prevents the BMS from tripping on the first heavy burst of the shift.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCradle showing a charging error on a new pack\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eA charging fault on a fresh pack almost always comes down to contact resistance at the dock, not the cell itself. Dock contacts in high-use warehouse environments collect dust and residue, which raises resistance enough for the cradle to flag an error. Wipe the gold contacts on both the battery and the cradle with a dry lint-free cloth, then reseat the scanner firmly. If the error clears, the contacts were the cause — not the pack.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eScanner losing wireless connection during rapid scan bursts\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe CV30 draws power simultaneously from the scan engine and the wireless radio during a rapid scan sequence. When the cell voltage sags under that combined load, the radio link drops before the scanner fully powers off — it looks like a connectivity fault but it is a voltage sag event. A cell that has aged past roughly 70% of its original capacity will sag far enough to trip this behaviour under a busy scan burst. Replace the pack and confirm the cradle charges it to 4.2V before returning the unit to the floor.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43324875079770,"sku":"BWCS-ICV300BL-1","price":26.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43324875112538,"sku":"BWCS-ICV300BL-2","price":30.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43324875145306,"sku":"BWCS-ICV300BL-3","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-ICV300BL-1.webp?v=1778123300","url":"https:\/\/batteryweb.com\/products\/honeywell-cv30-replacement-battery-37v-2600mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}