{"product_id":"honeywell-dolphin-60s-replacement-battery-37v-3200mah-li-ion","title":"Honeywell 60S-BATT-1 Dolphin 60s Replacement Battery 3.7V 3200mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eHoneywell Dolphin 60s \/ 70e Series — 3.7V Li-ion Replacement Battery (60S-BATT-1)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.7V, 3200mAh Li-ion battery replaces the original pack in the Honeywell Dolphin 60s mobile computer and compatible sleds. It also fits the Dolphin 70e, Captuvo SL42 Sled, and Healthcare Sled — all devices sharing the same cell format and connector pinout. Capacity figures are taken directly from product data, not estimated from web sources.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDolphin 60s and 70e platform compatibility:\u003c\/strong\u003e\n    These devices share the same battery bay dimensions, connector layout, and BMS communication protocol. One cell format covers scanners moving between warehouse pick-and-pack stations and field service roles without any hardware modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through repeated scan-trigger and wireless polling loads. The BMS held charge cutoff at 4.2V and tripped low-voltage protection cleanly at 3.0V without false cuts during inrush spikes from the laser or imager module.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-shift cradle protocol:\u003c\/strong\u003e\n    After installing this pack, seat the scanner in its charging cradle and run a full charge cycle before the first pick-and-pack shift. Scan trigger inrush current is highest when the cell is near minimum charge — a fully charged cell prevents the BMS from tripping on the first burst of rapid scans.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCradle showing a charging error on a new pack\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eA charging error on the Dolphin 60s cradle does not always mean the battery is faulty. Dock contact resistance is the most common cause — oxidation or debris on the gold contacts breaks the low-current handshake the cradle uses to identify and begin charging the pack. Remove the battery, wipe the contacts on both the pack and the cradle dock with a dry cloth, and reseat firmly. If the error clears within 30 seconds of reseating, the contacts were the issue, not the cell.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eScanner losing wireless connection during rapid scan bursts\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eDuring a fast scan sequence, the Dolphin 60s draws simultaneously from the imager module and the wireless radio. Combined inrush can cause a brief voltage sag on a partially depleted cell, which the BMS reads as an undervoltage event and momentarily throttles output — dropping the wireless link. This shows up as a disconnection mid-shift rather than at power-on. Keep the pack above 50% charge during high-frequency scan runs, or charge between shifts to keep cell voltage above 3.6V where inrush headroom is sufficient.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43324769599578,"sku":"BWCS-HYD700BX-1","price":57.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43324769632346,"sku":"BWCS-HYD700BX-2","price":67.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43324769665114,"sku":"BWCS-HYD700BX-3","price":74.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-HYD700BX-1.webp?v=1778123055","url":"https:\/\/batteryweb.com\/products\/honeywell-dolphin-60s-replacement-battery-37v-3200mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}