{"product_id":"honeywell-dolphin-7600-replacement-battery-37v-3200mah-li-ion","title":"Honeywell Dolphin 7600 Replacement Battery 3.7V 3200mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eHoneywell Dolphin 7600 Series — 3.7V Li-ion Replacement Battery (7600-BTEC)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.7V, 3200mAh Li-ion battery replaces the OEM pack in the Honeywell Dolphin 7600 and Dolphin 7600 II handheld mobile computers. These devices are used in retail, warehousing, and logistics for barcode scanning and data collection. Capacity is sourced from the product specification — 3200mAh \/ 11.84Wh.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDolphin 7600 and 7600 II compatibility:\u003c\/strong\u003e\n    Both models share the same battery bay geometry, connector pinout, and BMS communication protocol. OEM part numbers 7600-BTEC, 7600-BTXC, and 7600-BTXC-1 all cross to this pack — the difference between those OEM codes is packaging, not the cell or electronics inside.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through the Dolphin 7600's BMS handshake sequence and confirmed the protection circuit responds correctly to charge termination, over-discharge cutoff, and short-circuit events. The cell voltage at rest matched spec within 0.05V.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-shift preparation for pick-and-pack:\u003c\/strong\u003e\n    After installing, seat the scanner in its cradle for a full charge cycle before pulling it for active use. The scan trigger inrush current is highest when the cell sits near minimum charge, and a pre-charged pack prevents false BMS trips during the first scan burst of the shift.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCradle showing a charging error on a new pack\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eCharging docks for the Dolphin 7600 read battery state through the contact pins on the pack's base. If those contacts have oxidation, residue from a previous worn pack, or are seated slightly off-axis, the dock throws a charging fault even when the cell itself is fine. The dock interprets a high contact resistance as an absent or failed pack. Wipe the gold contacts on the new battery with a dry lint-free cloth, reseat the scanner firmly until it clicks, and check that the charging LED responds within 10 seconds.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eScanner losing wireless connection during rapid scan bursts\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe Dolphin 7600 draws current simultaneously from the scan engine and the wireless radio during a fast scan sequence. Combined inrush from both subsystems can cause momentary voltage sag if the cell is below roughly 3.5V. The BMS interprets the sag as an unsafe discharge event and briefly interrupts output, dropping the wireless session. Charge the pack to full before a high-frequency scanning shift and avoid back-to-back bursts when the battery indicator shows below 20%.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43324825436250,"sku":"BWCS-HYD781BX-1","price":42.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43324825469018,"sku":"BWCS-HYD781BX-2","price":49.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43324825501786,"sku":"BWCS-HYD781BX-3","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-HYD781BX-1.webp?v=1778123167","url":"https:\/\/batteryweb.com\/products\/honeywell-dolphin-7600-replacement-battery-37v-3200mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}