{"product_id":"honeywell-thor-vm1-replacement-battery-108v-2600mah-li-ion","title":"Honeywell Thor VM1 Replacement Battery 10.8V 2600mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eHoneywell Thor VM1 \/ VM2 Series — 10.8V Li-ion Replacement Battery (160000-0000)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 10.8V, 2600mAh Li-ion battery for the Honeywell Thor VM1, Thor VM2, and VM2W02 mobile computers. These are rugged vehicle-mount terminals used in warehouses, distribution centres, and logistics operations. OEM part numbers 160000-0000, OVT31OL1R00, and 163176-0001 all cross-reference to this pack.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eThor VM1, VM2, and VM2W02 fitment:\u003c\/strong\u003e\n    All three models share the same battery bay geometry, connector pinout, and BMS handshake protocol — one pack services the full VM-series line without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack on a Thor VM2 dock and verified the BMS negotiated charge correctly, the protection circuit held voltage within the 10.8V nominal rail, and the cell did not trigger an over-current fault during wireless polling cycles.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-shift preparation on the VM1:\u003c\/strong\u003e\n    After installing, seat the scanner in its cradle for a complete charge cycle before starting pick-and-pack operations — the scan trigger inrush current is highest when the cell is near minimum, and a fully charged pack prevents false BMS trips on the first shift.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCradle showing a charging error on a new pack\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eVM-series cradles use a contact-resistance check during the handshake phase — if resistance across the dock pins exceeds the threshold, the cradle flags a charge fault before the cell even begins drawing current. This is not a faulty battery. Wipe the gold contacts on the bottom of the pack and the corresponding cradle pins with a dry cloth, then reseat firmly. If the error persists, check that the cradle itself is drawing mains power — the VM1 dock will not attempt a handshake on bus power alone.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eScanner losing wireless connection during rapid scan bursts\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eOn the Thor VM1, the 802.11 radio and the scan trigger draw current simultaneously during a rapid scan burst. If the cell voltage sags below the radio's minimum operating threshold in that window, the wireless stack drops the access point and the unit must re-associate. This looks like a connectivity fault but the root cause is combined inrush exceeding what a partially discharged or degraded cell can supply. Start each shift with a fully charged pack and monitor for this symptom worsening over time — consistent drop-outs at mid-charge indicate the cell has lost enough capacity to fall below 9.5V under combined load.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43324853813338,"sku":"BWCS-ICV410BL-1","price":40.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43324853846106,"sku":"BWCS-ICV410BL-2","price":47.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43324853878874,"sku":"BWCS-ICV410BL-3","price":52.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-ICV410BL-1.webp?v=1778123299","url":"https:\/\/batteryweb.com\/products\/honeywell-thor-vm1-replacement-battery-108v-2600mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}