{"product_id":"hoover-air-cordless-2-in-1-deluxe-stick-replacement-battery-20v-6000mah-li-ion","title":"Hoover BH03120 20V 6000mAh Cordless Vacuum Replacement Battery","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eHoover Air Cordless 2-in-1 Deluxe Stick — 20V Li-ion Replacement Battery (BH03120)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 20V 6000mAh Li-ion battery replaces the original pack in the Hoover Air Cordless 2-in-1 Deluxe Stick and Handheld Vacuum. It fits models including BH52120PC and BH50140, covering a wide range of the Air Cordless series. Capacity figures come from the product data: 6000mAh \/ 120Wh.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eAir Cordless series compatibility:\u003c\/strong\u003e\n    These models share the same 20V battery rail, connector pinout, and BMS communication protocol. Swapping the pack doesn't require any reconfiguration — the charger and vacuum both recognise the replacement cell through the same handshake the OEM pack uses.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through charge and discharge cycles on the BH52120PC platform. The BMS responded correctly to the charger handshake, and the overcurrent cutoff triggered at the expected threshold under a simulated blocked-filter draw event — then recovered cleanly once load was removed.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging habit on this vacuum:\u003c\/strong\u003e\n    Do not leave the vacuum sitting on the charging dock permanently. The Air Cordless series does not cut dock power once the pack is full, so continuous trickle current accelerates capacity fade. Charge to full and remove from the dock.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator reaches low\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens when the motor draws more current than the battery's rated discharge ceiling — usually caused by a partially blocked filter or brush roll, not a weak cell. The voltage sag under restricted load tricks the BMS into reducing output before the fuel gauge registers low. The vacuum feels like it's running out of charge, but the pack still has capacity left. Clear the filter and check the brush roll for hair wrap before concluding the battery is at fault.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor cutting out mid-clean and then recovering on its own\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a BMS overcurrent trip, not a dead battery. When suction is restricted — clogged filter, blocked intake, or tangled brush roll — the motor pulls sustained high current, and the BMS interrupts the circuit to protect the cells. The vacuum restarts because the BMS resets once current demand drops. Fix the restriction first: clean or replace the filter, then check that the intake path is clear. If the cutout persists on a clean machine, measure pack voltage at rest — a healthy cell at this capacity should read above 21V off charge.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43428029628506,"sku":"BWCS-HVS122VX-1","price":112.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43428029661274,"sku":"BWCS-HVS122VX-2","price":132.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43428029694042,"sku":"BWCS-HVS122VX-3","price":147.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-HVS122VX-1.webp?v=1779933901","url":"https:\/\/batteryweb.com\/products\/hoover-air-cordless-2-in-1-deluxe-stick-replacement-battery-20v-6000mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}