{"product_id":"hoover-bh55210-replacement-battery-20v-2000mah-li-ion","title":"Hoover BH15030 20V Cordless Vacuum Replacement Battery 2000mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eHoover BH55210 Series — 20V Li-ion Replacement Battery (BH15030)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 20V 2000mAh Li-ion battery that replaces part number BH15030 in Hoover cordless stick vacuums. It fits the BH55210, BH53310, BH53350, BH53420, and over 30 additional Hoover models that share the same 20V battery platform. Capacity is 2000mAh (40Wh), matching the original specification.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBH55210 platform compatibility:\u003c\/strong\u003e\n    These Hoover models share the same 20V battery rail, connector pinout, and BMS handshake protocol. The battery slides into the same dock port and communicates charge state to the vacuum's motor controller without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through charge and discharge cycles on a BH55210 unit. The BMS responded correctly to motor-start current draw, held the voltage rail steady under load, and triggered protection cutoff at the expected low-voltage threshold.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging behaviour on this vacuum:\u003c\/strong\u003e\n    Remove the battery from the charging dock once it reaches full charge. Hoover cordless vacuums left on the dock indefinitely receive a low-level trickle current that accelerates capacity fade in Li-ion cells. Charge when depleted, then disconnect.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator reaches low\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens when the motor pulls more current than the battery's rated discharge ceiling — usually caused by a partially blocked filter or restricted airflow path. The voltage rail sags under that elevated draw, and the vacuum's motor controller reads it as a low-battery condition before the cell is actually depleted. Clean or replace the filter first. If suction recovers, the battery was never the problem. If the sag continues with a clean filter, the cell's internal resistance has increased and replacement is the correct fix.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor cutting out briefly then recovering mid-clean\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a BMS overcurrent trip, not a dead battery. It triggers when sustained restricted suction — from a clogged filter or blockage — forces the motor to draw above the BMS overcurrent threshold. The BMS cuts power to protect the cell, then resets after a few seconds. Clear any blockage in the brush roll or hose, then check that the filter is clean. If the cutout stops after clearing the restriction, the battery is functioning correctly.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43428022583386,"sku":"BWCS-HRB521VX-1","price":89.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43428022616154,"sku":"BWCS-HRB521VX-2","price":105.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43428022648922,"sku":"BWCS-HRB521VX-3","price":116.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-HRB521VX-1.webp?v=1779933901","url":"https:\/\/batteryweb.com\/products\/hoover-bh55210-replacement-battery-20v-2000mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}