{"product_id":"hoover-rbc001-replacement-battery-144v-3500mah-ni-mh","title":"Hoover RBC001 Replacement Battery 14.4V 3500mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eHoover RBC001 Series — 14.4V Ni-MH Replacement Battery (35601254)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 14.4V, 3500mAh Ni-MH replacement battery for the Hoover RBC001 robotic vacuum cleaner and its close variants. It replaces OEM part numbers 35601254 and RB201. Fit models include the RBC001, RBC002, RBC003, RBC004B, and over 20 additional units in the same platform family.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRBC-series platform compatibility:\u003c\/strong\u003e\n    These models share a common 14.4V power rail, identical cell bay dimensions, and the same connector and BMS communication protocol — which is why one battery covers the full range without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through charge cycles on the RBC dock and confirmed the BMS completed full charge handshake, released correctly at capacity, and held voltage under sustained motor load without tripping overcurrent cutoff.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging habit on the RBC series:\u003c\/strong\u003e\n    Do not leave the vacuum sitting on the charging dock permanently. Hoover RBC units on continuous dock charge develop capacity fade faster than units charged only when depleted. Charge to full, then remove from the dock until the next cleaning cycle.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator reaches low\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNi-MH cells under sustained motor load experience voltage sag — the battery reads as charged but cannot hold voltage under peak draw. On the RBC series, the drive and suction motors share the same rail, so sag hits suction first while navigation continues normally. A partially blocked filter forces the motor to draw above rated current, which accelerates the sag. If the original battery shows this symptom, a fresh cell at full 3500mAh will restore consistent suction output across a full clean cycle.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor cutting out mid-clean and then recovering after a pause\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a BMS overcurrent trip, not a dead battery. When the filter is restricted, the suction motor draws sustained current above the BMS threshold — the pack shuts the output to protect the cells, then resets after a short cooldown. Replacing the battery will not fix this if the filter is the root cause. Clean or replace the filter first, then recharge the new battery to full — a rested, fully charged cell at 14.4V handles normal motor-start surge without tripping.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43428043751514,"sku":"BWCS-KSB002VX-1","price":86.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43428043784282,"sku":"BWCS-KSB002VX-2","price":101.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43428043817050,"sku":"BWCS-KSB002VX-3","price":112.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-KSB002VX-1.webp?v=1779933966","url":"https:\/\/batteryweb.com\/products\/hoover-rbc001-replacement-battery-144v-3500mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}