{"product_id":"hp-pavilion-13-d-replacement-battery-114v-3900mah-li-polymer","title":"HP Pavilion 13-D VR03XL Replacement Battery 11.4V 3900mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eHP Pavilion 13-D Series — 11.4V Li-Polymer Replacement Battery (VR03XL)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is an 11.4V, 3900mAh (44.46Wh) lithium-polymer replacement battery for the HP Pavilion 13-D ultrabook series. It fits the Pavilion 13-D023TU, 13-D024TU, 13-D025TU, and over 271 additional Pavilion 13-D variants. The OEM part numbers VR03XL, HSTNN-IB7E, TPN-C120, and 816497-1C1 all cross to this cell.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePavilion 13-D platform fit:\u003c\/strong\u003e\n    Every Pavilion 13-D in this series runs the same 11.4V three-cell Li-Polymer architecture with a shared BMS handshake protocol. That common battery rail and connector spec is why one cell covers the full production run of this ultrabook line.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell on a Pavilion 13-D under combined CPU and display load. The BMS held the charge curve within spec and did not trip on load transitions. Charge termination cut cleanly at full capacity.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePost-install calibration on HP Pavilion 13-D:\u003c\/strong\u003e\n    After fitting this cell, run the laptop down to hibernate-cutoff under normal use, then charge uninterrupted to 100%. This resets the BIOS battery learn cycle and clears the inaccurate health warning that appears after every cell swap on this platform.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBIOS reporting battery health as poor immediately after replacement\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe HP Pavilion 13-D reads EEPROM data embedded in the original battery cell to establish its health baseline. When a new cell goes in, the BIOS compares the fresh EEPROM against the charge history it accumulated with the old battery — the numbers do not match, so it flags poor health. This is not a fault with the replacement cell. One full discharge-to-hibernate followed by a complete uninterrupted charge to 100% gives the BIOS enough data to re-establish its learn cycle and clear the warning.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003ePavilion 13-D shutting down at 20–30% charge shown on screen\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens because the fuel gauge IC in the laptop is still calibrated to the old cell's voltage curve. The new cell hits a voltage cliff under combined CPU and display load that the uncalibrated gauge does not anticipate, so the system shuts off before the displayed percentage reaches zero. It is not a BMS fault — it is a measurement mismatch. Run two or three full discharge-to-charge cycles and the fuel gauge IC will recalibrate against the new cell's actual voltage profile. After calibration, shutdown should not occur above 5–7% remaining.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43410735464538,"sku":"BWCS-HPM130NB-1","price":109.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43410735497306,"sku":"BWCS-HPM130NB-2","price":124.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43410735530074,"sku":"BWCS-HPM130NB-3","price":136.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-HPM130NB-1.webp?v=1779580583","url":"https:\/\/batteryweb.com\/products\/hp-pavilion-13-d-replacement-battery-114v-3900mah-li-polymer","provider":"BatteryWeb","version":"1.0","type":"link"}