{"product_id":"htc-desire-19s-replacement-battery-385v-2650mah-li-polymer","title":"HTC Desire 19S Replacement Battery B2Q74100 3.85V 2650mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eHTC Desire 19S — 3.85V Li-Polymer Replacement Battery (B2Q74100)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.85V, 2650mAh (10.2Wh) Li-Polymer cell built to replace the original B2Q74100 battery in the HTC Desire 19S smartphone. It matches the OEM voltage, connector, and physical footprint at 78.70 × 62.70 × 3.66mm. Drop it in when the original cell can no longer hold enough charge to get through a normal day of calls, messaging, and app use.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDesire 19S fit:\u003c\/strong\u003e\n    The Desire 19S uses a fixed Li-Polymer pouch cell with a dedicated BMS handshake tied to the B2Q74100 part number. This replacement carries the same voltage rail and connector pinout so the phone's charge IC recognises it without any firmware workaround.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell on the Desire 19S platform and monitored BMS communication throughout charge and discharge. The protection circuit held cutoff at the correct thresholds and the charge IC accepted the cell without error flags.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFuel gauge recalibration on first use:\u003c\/strong\u003e\n    After installation, disable fast charging and run one full discharge-to-charge cycle at standard current. This gives the fuel gauge IC time to map its coulomb counter against the new cell's discharge curve before high-current charging begins on an uncalibrated reference.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSudden shutdown at 20–30% on the Desire 19S after a cell swap\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eA new Li-Polymer cell has a slightly different internal resistance profile than the aged cell the fuel gauge IC was trained on. Under modem or display load, voltage sags faster than the IC expects, and the phone hits its hardware cutoff before the reported percentage reaches zero. The system reads 25% remaining but the cell voltage has already dropped below the protection threshold. One full discharge-charge cycle lets the coulomb counter reset its end-of-discharge reference to match the new cell.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eUSB fast charge not activating on the first cycle after replacement\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eOn the first charge after installation, the Desire 19S charge IC may stay in standard-current mode and not negotiate the higher charge rate. This happens because the BMS on the new cell starts with no cycle history, and some charge controllers default to a conservative current until they confirm cell health over at least one cycle. Let the phone complete one full charge at standard speed before expecting fast charge to engage. After that first cycle, fast charge should activate normally on subsequent sessions.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43391943409754,"sku":"BWCS-HTD190SL-1","price":30.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43391943442522,"sku":"BWCS-HTD190SL-2","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43391943475290,"sku":"BWCS-HTD190SL-3","price":37.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-HTD190SL-1.webp?v=1779142676","url":"https:\/\/batteryweb.com\/products\/htc-desire-19s-replacement-battery-385v-2650mah-li-polymer","provider":"BatteryWeb","version":"1.0","type":"link"}