{"product_id":"huace-m600-replacement-battery-74v-2000mah-li-ion","title":"HUACE M600 Survey Instrument Compatible Battery 7.4V 2000mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eHUACE M600 \/ R30 \/ X20 \/ X90 Series — 7.4V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 7.4V 2000mAh Li-ion battery replaces the original pack in HUACE M600, R30, X20, and X90 surveying instruments. It fits positioning and measurement equipment used in field survey, testing, and site measurement applications. Capacity is rated at 14.8Wh, matching the standard draw profile of these instruments.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eM600 \/ R30 \/ X20 \/ X90 platform:\u003c\/strong\u003e\n    These models share a 7.4V two-cell Li-ion architecture with the same connector pinout and BMS communication protocol. Swapping between units in this family requires no adapter or firmware change.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through instrument power-on, sensor initialisation, and sustained logging load. The BMS held voltage within spec during probe power-up current spikes and did not trip on cold-start draw.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePre-deployment calibration cycle:\u003c\/strong\u003e\n    After installing this pack, run a full calibration cycle through the instrument menu before heading into the field. The M600 and related units map battery state during calibration — skipping this step causes the low-battery warning to trigger early on the first measurement session, even with a full charge.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBMS cutoff when the M600 initialises its sensor or probe module\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eWhen the instrument powers its sensor module at startup, it pulls a brief current spike that can exceed the protection threshold on a degraded or cold pack. The BMS responds by cutting output, which looks like a random shutdown immediately after the splash screen. This battery's protection circuit is rated for the inrush profile these instruments generate. If cutoff still occurs at low ambient temperatures, warm the instrument to above 10°C before powering on — Li-ion internal resistance rises sharply in the cold and amplifies that spike.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eInstrument won't recognise the pack after it sat unused for several months\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eA Li-ion pack left discharged in a carry case will self-discharge below the BMS recovery threshold — typically around 2.5V per cell. Below that level, the BMS enters sleep mode and the instrument sees no battery at all. Standard chargers will not wake a pack in this state. Connect the battery to a charger with a recovery or boost mode, which applies a low trickle current until cell voltage climbs above 2.8V per cell. Once voltage recovers to that point, normal charging resumes and the instrument will recognise the pack again.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43360796115034,"sku":"BWCS-LI1SL-1","price":32.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43360796147802,"sku":"BWCS-LI1SL-2","price":37.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43360796180570,"sku":"BWCS-LI1SL-3","price":41.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-LI1SL-1.webp?v=1778616259","url":"https:\/\/batteryweb.com\/products\/huace-m600-replacement-battery-74v-2000mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}