{"product_id":"iboto-smart-aqua-x420gw-replacement-battery-144v-2600mah-li-ion","title":"iBoto Smart Aqua X420GW 14.4V Replacement Battery 2600mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eiBoto Smart Aqua X420GW — 14.4V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 14.4V 2600mAh lithium-ion battery replaces the original power cell in the iBoto Smart Aqua X420GW, Smart C820W Aqua, and Smart L920SW Aqua robotic vacuum cleaners. It fits the same cell housing and connector as the factory pack. Capacity is 2600mAh (37.44Wh), matching the rated spec for these models.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eX420GW, C820W Aqua, L920SW Aqua compatibility:\u003c\/strong\u003e\n    These three models share the same 14.4V battery bay, connector orientation, and BMS communication protocol. The cell dimensions are 70 × 38 × 38mm across all three, so the pack seats and locks without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran discharge cycles on this pack and monitored BMS cutoff behaviour. The protection circuit tripped cleanly at low-voltage threshold and reset correctly on reconnection to the charger — no lockout condition observed.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging habit on robotic vacuums:\u003c\/strong\u003e\n    Do not leave the unit sitting on the charging dock permanently between uses. Continuous trickle charging accelerates capacity fade in Li-ion packs faster than regular charge-and-remove cycles. Charge fully, then remove from the dock until the next use.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator reaches low\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens when the motor draws more current than the BMS allows under sustained load — typically caused by a partially blocked filter or brush roll restriction. The pack still holds charge, but voltage sags under the increased draw and the BMS reduces output to protect the cells. Clean the filter and check the brush roll for hair wrap before concluding the battery is at fault. A healthy pack under normal filter conditions will hold motor voltage above 12.5V through most of the cycle.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor cuts out mid-cycle and then recovers after a few seconds\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a BMS overcurrent trip, not a flat battery. When suction is restricted — blocked inlet, clogged filter, tangled brush — the motor spikes current draw beyond the BMS threshold and the circuit opens. It resets automatically after a brief cooldown, which is why the vacuum appears to restart on its own. Clear the blockage first. If cut-outs continue on a clean filter with a new battery, check that the charger is delivering a full charge cycle and that pack voltage reads at least 16.0V immediately after a full charge.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43427998203994,"sku":"BWCS-LTR300VX-1","price":43.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43427998236762,"sku":"BWCS-LTR300VX-2","price":51.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43427998269530,"sku":"BWCS-LTR300VX-3","price":56.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-LTR300VX_1.webp?v=1779933800","url":"https:\/\/batteryweb.com\/products\/iboto-smart-aqua-x420gw-replacement-battery-144v-2600mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}