{"product_id":"iboto-smart-l925-aqua-replacement-battery-144v-6700mah-li-ion","title":"iBoto Smart L925 Aqua 14.4V Replacement Battery 6700mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eiBoto Smart L925 Aqua — 14.4V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 14.4V 6700mAh lithium-ion replacement battery for the iBoto Smart L925 Aqua robotic vacuum cleaner. It slots into the robot's battery bay and restores power to the full navigation and cleaning system. When the original cell degrades and the unit cuts short or won't run, this is the direct swap.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSmart L925 Aqua platform:\u003c\/strong\u003e\n    The L925 Aqua runs a 14.4V drive and suction motor architecture with an onboard BMS that monitors cell voltage during navigation cycles. This cell matches that voltage rail and communicates correctly with the robot's charge and discharge logic.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through full charge and discharge cycles on compatible hardware. The BMS balanced cells correctly across the pack and the protection circuit tripped cleanly at low-voltage cutoff without false shutdowns during motor load transitions.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging habit for the L925 Aqua:\u003c\/strong\u003e\n    Do not leave the robot sitting on the dock continuously between uses. The L925 Aqua's charger maintains a trickle current when docked, and sustained trickle charging accelerates capacity fade in li-ion packs. Charge to full, then remove from the dock until the next session.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator reaches low\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe L925 Aqua's suction motor draws significantly more current when the filter is partially blocked. Under restricted airflow, the motor load increases, which causes the pack voltage to sag even when cell capacity is still adequate. The BMS reads this sag as a low-voltage condition and reduces power to the motor to protect the cells. Clean the filter and check the dustbin before assuming the battery is at fault — a clear airpath lets the motor draw at rated current and the voltage sag disappears.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor cuts out mid-cycle then recovers after a few seconds\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is an overcurrent trip, not a dead battery. When suction is restricted — blocked brush roll, full dustbin, or clogged filter — the motor draws a sustained current spike that exceeds the BMS protection threshold. The BMS interrupts discharge, the motor stops, and once current drops the circuit resets. Clear the restriction first. If the cutout continues on clean floors with no blockage, measure resting pack voltage after a full charge — it should read at or above 16.4V. A pack sitting below that after a full charge cycle indicates cell degradation.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43427988996186,"sku":"BWCS-PCM720VX-1","price":62.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43427989028954,"sku":"BWCS-PCM720VX-2","price":72.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43427989061722,"sku":"BWCS-PCM720VX-3","price":80.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-PCM720VX-1.webp?v=1779933755","url":"https:\/\/batteryweb.com\/products\/iboto-smart-l925-aqua-replacement-battery-144v-6700mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}