{"product_id":"iclebo-free-replacement-battery-144v-3400mah-li-ion","title":"ICLEBO Free YBR-B02-1 Replacement Battery 14.4V 3400mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eICLEBO Free \/ Plus \/ Pro Series — 14.4V Li-ion Replacement Battery (YBR-B02-1)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 14.4V, 3400mAh Li-ion battery for the ICLEBO Free, Plus, Pro, and Robot Pro YCR-M04-02-R robotic vacuum cleaners. It replaces OEM part numbers YBR-B02-1 and YCR-B01-3. When the original cell degrades, suction drops and cleaning cycles shorten — this battery restores both.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFree, Plus, and Pro platform compatibility:\u003c\/strong\u003e\n    These models share the same 14.4V battery rail, connector pinout, and BMS handshake protocol. One cell fits all listed variants without modification or adapter.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through full charge and discharge cycles on the ICLEBO platform. The BMS passed overcurrent protection checks and communicated correctly with the charger throughout.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging habit for this robot:\u003c\/strong\u003e\n    Do not leave the robot parked on the charging dock continuously. ICLEBO robotic vacuums on permanent dock contact receive a low-level trickle charge that accelerates capacity fade. Charge to full, then remove the robot from the dock until the next cleaning cycle.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator reaches low\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens when the motor draws higher current than rated — usually caused by a partially blocked filter or brush roll restriction. Under that extra load, cell voltage sags early and the BMS throttles power to protect the pack, which the robot interprets as a low-battery condition. The indicator hasn't caught up because voltage sag is temporary, not a true state-of-charge reading. Clear the filter and brush roll first, then retest — if suction holds, the battery is fine.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor cutting out mid-cycle and then recovering on its own\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is an overcurrent trip, not a dead battery. When the brush roll hits heavy carpet or a blockage, current spikes past the BMS threshold and the pack shuts output to prevent cell damage. After a few seconds the BMS resets and power returns. Remove any debris from the brush roll channel, clean the filter, and run a cycle — if the cutout stops, the restriction was the cause. If it continues on a clear floor, check that the replacement cell is sitting fully seated and the connector is locked at 14.4V.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43426463842394,"sku":"BWCS-PHC911VX-1","price":76.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43426463875162,"sku":"BWCS-PHC911VX-2","price":90.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43426463907930,"sku":"BWCS-PHC911VX-3","price":101.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-PHC911VX-1.webp?v=1779933315","url":"https:\/\/batteryweb.com\/products\/iclebo-free-replacement-battery-144v-3400mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}