{"product_id":"iclebo-omega-replacement-battery-1452v-6800mah-li-ion","title":"ICLEBO Omega Replacement Battery 14.52V 6800mAh Li-ion","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eICLEBO Omega \/ O5 Series — 14.52V Li-ion Replacement Battery (YCR-MT12-S1)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 14.52V, 6800mAh Li-ion replacement battery for the ICLEBO Omega, O5, and XIC013 robotic vacuum cleaners. It replaces OEM part numbers YCR-MT12-S1 and YCR-M07-20W. When the original cell degrades and cleaning cycles shorten, swapping this battery restores full operating capacity.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eOmega and O5 platform fit:\u003c\/strong\u003e\n    The Omega, O5, YCR-M07-20W, and XIC013 all share the same 14.52V battery rail, connector pinout, and BMS communication protocol — one cell covers the entire range.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this battery through charge and discharge cycles on the Omega platform. The BMS completed the handshake with the dock charger without error, and overcurrent protection tripped correctly during simulated motor load spikes.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging habit for this vacuum:\u003c\/strong\u003e\n    Do not leave the ICLEBO Omega sitting on the charging dock permanently between cleans. Continuous trickle charging accelerates capacity fade in Li-ion cells faster than regular charge-and-remove cycles. Charge to full, then lift it off the dock.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator reaches low\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe Omega's motor draws significantly more current when the filter is partially blocked or the brush roll is tangled. That elevated draw causes voltage to sag at the cell terminals before the indicator registers a low state. The BMS reads this sag as a load problem, not a charge problem, so the indicator stays green while suction weakens. Clean the filter and clear the brush roll — if suction recovers immediately, the battery is not the fault.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor cutting out mid-clean then recovering after a few seconds\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a BMS overcurrent trip, not a dead battery. When sustained suction restriction forces the motor to pull above the BMS current threshold, the pack disconnects as a protection measure. The BMS resets after a short thermal recovery window, which is why the vacuum restarts on its own. Clear the filter and check the intake path for blockages before assuming the replacement cell is at fault — verify pack voltage sits above 13.0V after a full charge.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43428020224090,"sku":"BWCS-YCM721VX-1","price":85.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43428020256858,"sku":"BWCS-YCM721VX-2","price":99.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43428020289626,"sku":"BWCS-YCM721VX-3","price":110.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-YCM721VX-1.webp?v=1779933918","url":"https:\/\/batteryweb.com\/products\/iclebo-omega-replacement-battery-1452v-6800mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}