{"product_id":"ideebo-t70-replacement-battery-252v-4500mah-li-ion","title":"IDEEBO T70 Cordless Vacuum Compatible Battery 25.2V 4500mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eIDEEBO T70 \/ T80 — 25.2V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 25.2V, 4500mAh lithium-ion replacement battery for the IDEEBO T70 and T80 cordless stick vacuums. It slots into the same battery bay as the original and connects to the same BMS communication line the vacuum's motor controller expects. Capacity figure comes from the product data — 4500mAh, 113.4Wh.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eT70 and T80 compatibility:\u003c\/strong\u003e\n    Both models run on the same 25.2V six-cell Li-ion pack with an identical connector housing and BMS handshake protocol. The motor controller on each vacuum reads cell status through that handshake before allowing full-power draw — a mismatched pack will either refuse to run or trip immediately under load.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack on a T70 unit under simulated carpet-load current draw. The BMS held the discharge curve steady through the mid-range and cut off cleanly at the low-voltage threshold — no premature trip, no voltage drop outside expected parameters.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging on cordless vacuums:\u003c\/strong\u003e\n    Do not leave the vacuum sitting on the charging dock permanently. Continuous trickle charge accelerates capacity fade on Li-ion cells faster than normal cycle use. Charge to full, then remove from the dock until the next use.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator reaches low\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe T70 motor controller throttles power when cell voltage sags under load — even if the indicator still shows a mid or full charge. This happens most often when the filter is partially blocked, forcing the motor to draw above its rated current. The BMS reads that sustained overcurrent as a cell-stress event and reduces output to protect the pack. Clean or replace the filter first — if suction recovers immediately, the battery is not the fault.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor cuts out briefly then restarts on its own\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a BMS overcurrent trip, not a dead battery. When suction is restricted — blocked filter, blocked brush head, or hair wrap on the roller — the motor stalls partially and draws a current spike. The BMS interrupts the circuit to protect the cells, then resets after a short cooldown. Clear the blockage completely, then restart the vacuum. If it trips again on a clear airpath, check that the replacement pack's BMS is reading cell voltage correctly by charging to full — 29.4V at the pack terminals — before the next use.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43427951411290,"sku":"BWCS-PHW412VX-1","price":128.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43427951444058,"sku":"BWCS-PHW412VX-2","price":152.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43427951476826,"sku":"BWCS-PHW412VX-3","price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-PHW412VX-1.webp?v=1779933439","url":"https:\/\/batteryweb.com\/products\/ideebo-t70-replacement-battery-252v-4500mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}