{"product_id":"imou-auto-vazio-replacement-battery-144v-5200mah-li-ion","title":"Imou Auto-Vazio 14.4V Replacement Battery 5200mAh Li-ion","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eImou Auto-Vazio — 14.4V Li-ion 5200mAh Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 14.4V, 5200mAh Li-ion replacement battery for the Imou Auto-Vazio robotic vacuum cleaner. It fits directly into the Auto-Vazio and restores the unit's ability to complete full cleaning cycles. No OEM part number is published for this cell, so match by model name before ordering.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eAuto-Vazio platform fit:\u003c\/strong\u003e\n    The Auto-Vazio runs a 14.4V drive and suction motor rail from a single battery pack. This cell matches that voltage rail and the physical pack dimensions (136.60 × 37.60 × 37.30mm), so the connector seats correctly and the BMS communicates with the vacuum's onboard charge circuit.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through full charge and discharge passes on the Auto-Vazio platform. The BMS responded correctly at cutoff thresholds — no false low-battery flags and no mid-cycle shutdowns under normal suction load.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging habit for the Auto-Vazio:\u003c\/strong\u003e\n    Do not leave the Auto-Vazio sitting on the dock continuously between uses. Robotic vacuums on permanent dock contact trickle-charge indefinitely, which compresses cell capacity faster than regular charge-and-remove cycles. Charge to full, then lift the unit off the dock.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator reaches low on the Auto-Vazio\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens when the suction motor draws more current than the battery can sustain at its current state of charge. A partially blocked filter forces the motor to work harder, pulling current above the rated draw and causing voltage to sag early. The BMS reads that voltage sag as low battery and throttles power before the indicator catches up. Clean the filter first — if suction still drops early after a fresh filter, the battery cell has degraded and needs replacement.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eAuto-Vazio motor cuts out mid-clean and then restarts on its own\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a BMS overcurrent trip, not a faulty motor. When the suction path is restricted — blocked brush roll, clogged filter, or debris in the inlet — the motor pulls sustained high current and the BMS interrupts the circuit to protect the cells. Once current drops, the BMS resets and the motor restarts. Clear the brush roll and inlet, then run a clean cycle. If trips continue on an unobstructed vacuum, verify pack voltage at the terminals is holding above 12.5V under load.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43427996074074,"sku":"BWCS-PCM710VX-1","price":70.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43427996106842,"sku":"BWCS-PCM710VX-2","price":83.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43427996139610,"sku":"BWCS-PCM710VX-3","price":92.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-PCM710VX-1.webp?v=1779933755","url":"https:\/\/batteryweb.com\/products\/imou-auto-vazio-replacement-battery-144v-5200mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}