{"product_id":"imou-auto-vazio-replacement-battery-144v-6700mah-li-ion","title":"Imou Auto-Vazio 14.4V Cordless Vacuum Compatible Battery 6700mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eImou Auto-Vazio — 14.4V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 14.4V Li-ion battery rated at 6700mAh (96.48Wh) for the Imou Auto-Vazio robotic vacuum cleaner. It fits directly into the Auto-Vazio and restores power to the motor and cleaning system. When the original cell degrades and the vacuum can no longer complete a full cleaning cycle, this replacement brings it back to spec.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eAuto-Vazio platform fit:\u003c\/strong\u003e\n    The Auto-Vazio runs its drive motors, suction motor, and navigation system from a single 14.4V Li-ion pack. The BMS on this replacement is matched to that voltage rail, so the charger handshake and cell monitoring behave the same as the factory unit.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through charge and discharge cycles on the bench. The BMS held the 14.4V nominal rail without false low-voltage cutoffs and accepted a full charge without triggering thermal protection flags.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging habit on robotic vacuums:\u003c\/strong\u003e\n    Do not leave the Auto-Vazio sitting on its dock permanently. Robotic vacuums on continuous dock charge develop capacity fade faster than units charged only when depleted. Charge to full, then remove the unit from the dock until the next scheduled run.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCordless vacuum losing suction before the battery indicator reaches low\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens when the suction motor draws more current than the BMS expects, triggering a soft voltage sag before the cell is actually depleted. On the Auto-Vazio, a partially blocked filter is the most common cause — restricted airflow forces the motor to work harder, pulling extra current and dragging the voltage down early. The BMS reads this sag as low charge and reduces output to protect the cell. Clean or replace the filter first, then retest before assuming the battery is at fault.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor cuts out mid-cycle then recovers after a short pause\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a BMS overcurrent trip, not a dead battery. When the suction path is restricted — blocked brush roll, clogged filter, or debris jam — the motor spikes current above the BMS threshold and the pack shuts off briefly to protect the cells. After a few seconds the BMS resets and power returns. Clear the brush roll and filter, then confirm the suction path is unobstructed. If the cutout continues on a clean machine, measure resting pack voltage — a healthy cell at partial charge should read above 13.5V.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43427987456090,"sku":"BWCS-PCM720VX-1","price":62.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43427987488858,"sku":"BWCS-PCM720VX-2","price":72.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43427987521626,"sku":"BWCS-PCM720VX-3","price":80.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-PCM720VX-1.webp?v=1779933755","url":"https:\/\/batteryweb.com\/products\/imou-auto-vazio-replacement-battery-144v-6700mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}