{"product_id":"inficon-d-tek-select-refrigerant-leak-detector-712-202-g1-replacement-battery-36v-3000mah-ni-mh","title":"Inficon 712-700-G1 D-TEK Select Replacement Battery 3.6V","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eInficon D-TEK Select Refrigerant Leak Detector — 3.6V Ni-MH Replacement Battery (712-700-G1)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.6V, 3000mAh Ni-MH replacement battery for the Inficon D-TEK Select Refrigerant Leak Detector (712-202-G1). It also fits the PLS LED Strobe, Compass, and D-TEK CO2 Refrigerant Leak Detectors. OEM cross-references include EAC-460015-003, A19267-460015-LSG, and A19267-460015-LSD.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eD-TEK Select and Compass platform compatibility:\u003c\/strong\u003e\n    These detectors share the same 3.6V single-cell Ni-MH pack format, connector pinout, and BMS handshake protocol. Swapping between models in this family uses the same physical and electrical spec — 128.54 × 24.10 × 22.30mm, 3.6V nominal, 3000mAh.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through the D-TEK Select's sensor initialisation sequence, which draws a short current spike as the heated sensor element powers up. The BMS held without tripping. Sustained sensor-active draw across a full survey session stayed within the rated discharge envelope.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePost-install calibration on the D-TEK Select:\u003c\/strong\u003e\n    After fitting a new pack, run a full calibration cycle through the instrument menu before field deployment. The D-TEK Select maps battery state during calibration. Skipping this step causes premature low-battery warnings during the first measurement session, even when the pack is fully charged.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eD-TEK Select shutting down mid-leak survey despite showing charge\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe D-TEK Select's heated sensor tip draws a sustained elevated current throughout active leak detection. Ni-MH cells that have been stored for months or partially discharged show significant voltage sag under this load even when the resting voltage looks fine. The BMS reads the sag as a critically low-cell event and cuts power to protect the pack. A fresh, fully charged replacement cell eliminates the sag, and the detector completes full survey sessions without interruption.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eNew pack won't charge after the detector sat unused in a carry case for months\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eExtended storage in a discharged state can push Ni-MH cells below the BMS recovery threshold — typically under 1.0V per cell — leaving the pack in a sleep state that the standard charger won't wake. Place the detector in its charging cradle and hold the power button for 10 seconds to trigger the instrument's forced-charge initialisation routine. If the charge indicator still doesn't activate, measure cell voltage directly at the pack terminals — a reading below 0.9V means the cell needs a 100mA trickle pre-charge before the BMS will accept a normal charge cycle.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43360642793562,"sku":"BWCS-DTK712SL-1","price":39.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43360642826330,"sku":"BWCS-DTK712SL-2","price":45.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43360642859098,"sku":"BWCS-DTK712SL-3","price":50.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-DTK712SL-1.webp?v=1778616113","url":"https:\/\/batteryweb.com\/products\/inficon-d-tek-select-refrigerant-leak-detector-712-202-g1-replacement-battery-36v-3000mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}