{"product_id":"ingenico-a8-pro-replacement-battery-74v-2600mah-li-ion","title":"Ingenico A8 Pro Replacement Battery 7.4V 2600mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eIngenico A8 Pro Series — 7.4V Li-ion Replacement Battery (LD18650F-1)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 7.4V 2600mAh Li-ion battery replaces the original pack in the Ingenico A8 Pro and A8 Pro-92D3 payment terminals. It matches the OEM part numbers LD18650F-1 and LD18650H-1. Voltage, connector, and BMS communication specs align with the terminal's power management circuit.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eA8 Pro and A8 Pro-92D3 compatibility:\u003c\/strong\u003e\n    Both variants share the same 7.4V battery rail, connector pinout, and BMS handshake protocol. A single cell pack covers both units without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through full charge and discharge on the A8 Pro platform. The BMS accepted the cell, reported state-of-charge correctly, and held voltage within the terminal's expected operating band under combined display, wireless, and printer load.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst transaction cycle after installation:\u003c\/strong\u003e\n    After fitting, complete one full transaction — card read, authorization, and receipt print — before deploying in a live environment. The terminal maps battery capacity during real operation, and at least one complete cycle is needed for the charge indicator to read accurately.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eTerminal rebooting mid-transaction after battery swap\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe A8 Pro's receipt printer draws a sharp current spike the moment it fires the thermal head. On a new or cold cell, the BMS can read that spike as an overcurrent event and cut output instantly. This trips the terminal mid-sale — the screen goes dark and it restarts. Running two or three full transaction cycles conditions the BMS trip threshold to the terminal's actual load profile, and the reboot issue typically stops after that warm-up period.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eTerminal not completing PCI boot sequence on new battery\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe A8 Pro runs a PCI-compliant boot check that requires stable voltage above a minimum threshold before it hands off to the OS. A new cell that hasn't completed a full charge cycle may sit just below that threshold, causing the terminal to stall or loop at the boot screen. Connect the terminal to its charging dock and allow a full uninterrupted charge — do not power it on mid-cycle. Once charge reaches 100% and the cell is at or above 8.2V resting voltage, the PCI sequence should complete normally on the next boot.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43415921950810,"sku":"BWCS-INA810BL-1","price":40.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43415921983578,"sku":"BWCS-INA810BL-2","price":47.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43415922016346,"sku":"BWCS-INA810BL-3","price":52.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-INA810BL-1.webp?v=1779757951","url":"https:\/\/batteryweb.com\/products\/ingenico-a8-pro-replacement-battery-74v-2600mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}