{"product_id":"inter-tel-axxess-int4000-replacement-battery-36v-700mah-ni-mh","title":"Inter-Tel Axxess INT4000 Replacement Battery 3.6V 700mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eInter-Tel Axxess INT4000 \/ INT400 — 3.6V Ni-MH Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.6V, 700mAh Ni-MH battery replaces the original pack in the Inter-Tel Axxess INT4000 and INT400 cordless handsets. It fits the same footprint and connector as the factory cell, restoring power to the handset without modification. Capacity comes from the product data: 700mAh (2.52Wh).\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eINT4000 and INT400 compatibility:\u003c\/strong\u003e\n    Both models share the same 3.6V single-cell NiMH bay, connector pinout, and base-station charge circuit. One battery fits both because the charging logic reads cell voltage — not a model-specific handshake.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through the INT4000 base station and confirmed the charge circuit accepted the cell without error. The BMS on the base held a steady trickle through the full charge window with no cutoff events.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-charge protocol for NiMH handsets:\u003c\/strong\u003e\n    After installing, seat the handset in the base and leave it for a full 16 hours before first use. NiMH cells ship in a partially discharged state — skipping this slow initial charge cuts into the capacity the cell can actually deliver across its first few cycles.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eTalk time shorter than the original battery after replacement\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNiMH cells don't deliver full rated capacity until they've been through three to five full charge-discharge cycles. A new pack in the INT4000 will likely feel weaker than the old battery for the first few days — that's normal electrochemical conditioning, not a fault with the cell. Each full cycle allows the active material in the electrode to saturate more completely. By cycle five, capacity should be at or close to the rated 700mAh.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBase station charge light stays off or shows an error after fitting the new pack\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNiMH cells can drop to very low voltages during extended storage — sometimes below the threshold the INT4000 base will recognise as a valid battery. The base charge circuit looks for a minimum voltage before it starts the charge sequence. If the light won't come on, remove the handset, wait 30 seconds, and reseat it firmly — contact resistance at the charge pins is a common cause. If the base still won't start charging, check that the cell voltage is above 1.0V per cell (3.0V total) with a multimeter before assuming the base or battery is faulty.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43339948195930,"sku":"BWCS-BT930CL-1","price":21.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43339948228698,"sku":"BWCS-BT930CL-2","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43339948261466,"sku":"BWCS-BT930CL-3","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-BT930CL-1.webp?v=1778366983","url":"https:\/\/batteryweb.com\/products\/inter-tel-axxess-int4000-replacement-battery-36v-700mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}