{"product_id":"intermec-cv41-replacement-battery-108v-2600mah-li-ion","title":"Intermec CV41 Replacement Battery 10.8V 2600mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eIntermec CV41 \/ VM1376 — 10.8V Li-ion Replacement Battery (160000-0000)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 10.8V 2600mAh lithium-ion pack replaces the original battery in the Intermec CV41 and VM1376 mobile computers. Both are vehicle-mount and handheld units used in warehouse picking, inventory scanning, and asset tracking. Voltage and cell count match the OEM spec exactly.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCV41 and VM1376 shared platform:\u003c\/strong\u003e\n    Both models run the same 10.8V three-cell battery rail with an identical connector pinout and BMS handshake. One pack covers both units without modification or adapters.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through charge and discharge cycles on a CV41 unit. The BMS reported state-of-charge correctly to the device OS, and protection circuitry tripped at expected thresholds under simulated scan-burst inrush loads.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-shift preparation:\u003c\/strong\u003e\n    After installing this pack, seat the scanner in its charging cradle and run a full charge cycle before the first pick-and-pack shift. Scan trigger inrush current peaks when the cell is near minimum charge — a full cell prevents false BMS trips when the laser or imager fires repeatedly on the first use.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCradle showing a charging error after fitting a new pack\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eCV41 charging docks use contact pins that oxidise quickly in dusty warehouse air. When contact resistance rises above a threshold, the dock's charge controller reads an abnormal voltage curve and flags an error rather than starting a charge cycle. Wipe the gold contacts on both the battery pack and the dock with a dry cloth or isopropyl swab, then firmly reseat the unit. If the error clears within 30 seconds of reseating, contact resistance was the cause — not a faulty pack.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eScanner dropping its wireless connection during rapid scan bursts\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe CV41 draws from the same cell simultaneously for the imager and the 802.11 radio. During a fast scan burst, combined inrush can cause a momentary voltage sag that the radio interprets as a power fault, dropping the wireless session. This is more common on a partially depleted pack. Keep the battery above 30% during active picking runs — voltage sag under combined load narrows significantly above that threshold.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43324854304858,"sku":"BWCS-ICV410BL-1","price":40.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43324854337626,"sku":"BWCS-ICV410BL-2","price":47.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43324854370394,"sku":"BWCS-ICV410BL-3","price":52.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-ICV410BL-1.webp?v=1778123299","url":"https:\/\/batteryweb.com\/products\/intermec-cv41-replacement-battery-108v-2600mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}