{"product_id":"intermec-rp4-replacement-battery-74v-5200mah-li-ion","title":"Intermec RP4 Replacement Battery 7.4V 5200mAh 550053-000","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eIntermec RP4 — 7.4V Li-ion Replacement Battery (550053-000)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 7.4V, 5200mAh Li-ion replacement battery for the Intermec RP4 mobile receipt and label printer. It fits the RP4 directly, using OEM part number 550053-000. Capacity is rated at 38.48Wh — consistent with the original cell specification.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRP4 platform fit:\u003c\/strong\u003e\n    The RP4 uses a single 7.4V Li-ion pack with a dedicated BMS handshake. This replacement matches that voltage rail and connector orientation, so the printer firmware recognises the pack and reports charge state correctly through the battery indicator.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through full charge and load cycles on the RP4. The BMS held steady across paper-feed motor draw spikes and thermal head activation. Charge acceptance matched the original cell profile — no faults thrown during either cycle.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-use calibration for the RP4:\u003c\/strong\u003e\n    After installing, charge fully and run five test receipt prints before deploying. The RP4's paper feed motor draws current in short bursts — these test prints establish the BMS current profile for the new cell and prevent feed errors under real print load.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the RP4 stops printing after sitting unused in a bag or dock\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe RP4's paper feed motor requires a minimum voltage threshold to engage. If the battery has self-discharged below approximately 6.8V during storage, the printer may power on but refuse to feed or print. The BMS interprets this as an under-voltage condition and blocks current to the motor drive circuit. To recover, connect the printer to the charger for at least 20 minutes before attempting to print — this brings the cell above the BMS release threshold and restores normal motor operation.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003ePrint coming out faded or uneven on a charged battery\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eFaded or inconsistent print on the RP4 is almost always a voltage stability issue, not a paper or head fault. The thermal print head requires a steady voltage to reach consistent activation temperature — if the battery is ageing or partly discharged, voltage sag during head activation reduces print density unevenly across the receipt. Check the battery indicator before blaming the head or paper stock. If the pack shows two bars or fewer, charge to full and retest — consistent print density returns at voltages above 7.0V under load.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43415993188442,"sku":"BWCS-HPR400SL-1","price":56.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43415993221210,"sku":"BWCS-HPR400SL-2","price":66.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43415993253978,"sku":"BWCS-HPR400SL-3","price":73.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-HPR400SL-1.webp?v=1779758841","url":"https:\/\/batteryweb.com\/products\/intermec-rp4-replacement-battery-74v-5200mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}