{"product_id":"interstate-replacement-battery-36v-850mah-ni-mh","title":"Interstate ATEL0006 Cordless Phone Compatible Battery 3.6V 850mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eInterstate ATEL0006 — 3.6V Ni-MH Replacement Battery for Cordless Phones\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis Interstate battery replaces the ATEL0006 pack used in compatible cordless phone handsets. It runs at 3.6V with 850mAh capacity and uses Ni-MH chemistry — the same type as the original factory pack. If your handset is shutting off early or no longer holding a charge, this is the direct swap.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCordless phone handset fit:\u003c\/strong\u003e\n    Cordless phones in this category share a 3.6V Ni-MH cell stack with a standard connector footprint. The ATEL0006 part number cross-references to handsets where the OEM and aftermarket packs use the same pin layout and BMS-free charge circuit, so the base station charges it through the same trickle-charge path as the original.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through charge and discharge on a 3.6V Ni-MH test rig. The cell voltage held within spec across five full cycles, and capacity climbed toward rated 850mAh by cycle three — normal Ni-MH behaviour from factory-fresh cells.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst charge on install:\u003c\/strong\u003e\n    After installing, seat the handset in the base and leave it for a full 16 hours before first use. Ni-MH cordless phone packs ship partially discharged. A slow initial charge lets the cells reach rated capacity — skipping it cuts your usable talk time from day one.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eTalk time shorter than the original battery after replacement\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eFresh Ni-MH cells often deliver below rated capacity for the first two to five cycles. The electrodes need repeated charge and discharge passes to reach full chemical activation — this is normal, not a defect. Each full cycle after install adds measurable capacity back. By cycle four or five, you should see talk time close to or matching the 850mAh rating.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBase station showing no charge or error light after swap\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNi-MH packs that have sat in storage can drop below the voltage threshold the base station expects to see before it starts charging. If the base shows an error light or no charge indicator, remove the handset, leave it out for 30 seconds, then re-seat it firmly. If the base still won't initiate, measure the pack voltage — it should read at least 3.0V. Below that, the base charge circuit may not trigger, and the pack will need a short external boost charge to recover.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43340110233690,"sku":"BWCS-P104CL-1","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43340110266458,"sku":"BWCS-P104CL-2","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43340110299226,"sku":"BWCS-P104CL-3","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-P104CL-1.webp?v=1778367188","url":"https:\/\/batteryweb.com\/products\/interstate-replacement-battery-36v-850mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}