{"product_id":"jenoptik-100z3ss-replacement-battery-37v-720mah-li-ion","title":"Jenoptik 10.0Z3SS Compatible Battery 3.7V 720mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eJenoptik 10.0Z3SS — 3.7V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.7V, 720mAh Li-ion cell for the Jenoptik 10.0Z3SS digital camera. It slots into the camera body wherever the original cell is fitted. Voltage and physical dimensions match the OEM spec: 39.50 × 35.40 × 5.60mm.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003e10.0Z3SS platform fit:\u003c\/strong\u003e\n    The 10.0Z3SS runs a 3.7V single-cell architecture with a slim profile battery bay. This cell matches that bay geometry and voltage rail exactly — no adapters or modifications needed.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through charge and discharge cycles on the bench. The BMS accepted the cell without fault flags, and voltage output held steady across the discharge curve through both still capture and playback loads.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-use charge cycle on the 10.0Z3SS:\u003c\/strong\u003e\n    Before heavy shooting, run one full charge cycle through the camera body or OEM charger. Some compact camera BMS systems use that first charge cycle to calibrate the battery-remaining indicator — skipping it can cause the display to read inaccurately from the start.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCamera showing dead battery indicator on a partially charged replacement cell\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe 10.0Z3SS maps its battery indicator to a voltage-threshold table built around the original cell's discharge curve. A new third-party cell can sit at a slightly different resting voltage after shipping, which the camera reads as critically low or empty. This is a display calibration issue, not a faulty battery. Insert the cell and run a full charge cycle in the camera body — the BMS will remap its thresholds and the indicator will read correctly from that point forward.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBattery percentage jumping erratically during a shoot\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eCompact cameras like the 10.0Z3SS use stepped voltage thresholds to estimate remaining charge. A replacement cell with a slightly different discharge curve can cause the indicator to jump between steps — showing 60%, dropping to 20%, then recovering. This is a firmware-side mapping mismatch, not cell failure. The fix is to let the battery discharge fully, then charge to 100% without interruption so the camera can re-anchor its threshold readings to the actual cell curve.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43333840830554,"sku":"BWCS-KLIC7001-1","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43333840863322,"sku":"BWCS-KLIC7001-2","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43333840896090,"sku":"BWCS-KLIC7001-3","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-KLIC7001-1.webp?v=1778213291","url":"https:\/\/batteryweb.com\/products\/jenoptik-100z3ss-replacement-battery-37v-720mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}