{"product_id":"jvc-gr-d796-replacement-battery-74v-750mah-li-ion","title":"JVC BN-VF808 Replacement Battery 7.4V 750mAh Li-ion","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eJVC GR-D796 \/ GZ-HD40 Series — 7.4V Li-ion Replacement Battery (BN-VF808)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 7.4V, 750mAh Li-ion replacement cell for the JVC BN-VF808 and BN-VF808U battery. It fits the GR-D796, GR-D750, GZ-HD40, GZ-HD40AC, and over 230 additional JVC MiniDV and HD camcorder models. Voltage and capacity match the original spec exactly.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eGR-D796 and GZ-HD40 series fit:\u003c\/strong\u003e\n    These camcorders share the same 7.4V two-cell Li-ion voltage rail, the same physical latch connector, and the same BMS handshake protocol — which is why one battery covers both MiniDV and early HD bodies in this JVC lineup.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through charge and discharge cycles on a GZ-HD40 body. The BMS accepted the cell without error, voltage held steady across the discharge curve, and the protection circuit tripped correctly at the low-voltage cutoff threshold.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-use charge cycle on camcorder body:\u003c\/strong\u003e\n    Insert the battery and charge it fully through the camcorder body or JVC OEM charger before your first recording session. Some JVC BMS firmware needs one complete in-body charge cycle to calibrate the battery-remaining indicator accurately on screen.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the GR-D796 shows a dead battery indicator on a partially charged replacement cell\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eJVC's battery gauge maps remaining charge to a voltage-threshold table stored in the camcorder firmware. A new third-party cell has a slightly different discharge curve than the original, so the firmware reads the voltage and maps it to the wrong percentage tier. This usually presents as the indicator jumping from full to one bar without any middle steps. One full charge-discharge cycle from within the camera body re-anchors the threshold mapping and the indicator stabilises.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCamcorder cuts power abruptly during HD recording even with a charged battery\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eHD recording on the GZ-HD40 series pulls significantly more current than standard MiniDV playback — sensor readout, codec processing, and the optical image stabiliser all draw simultaneously. At peak load, if the BMS protection circuit sees a momentary voltage sag below its cutoff threshold, it shuts the cell down as a precaution. This is more common when the cell is cold or has been sitting discharged for weeks. Warm the camcorder to room temperature, charge the battery to full (4.2V per cell, 8.4V total), and the BMS cutoff will have adequate headroom to sustain the HD recording load.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43333880086618,"sku":"BWCS-JVF808U-1","price":30.99,"currency_code":"USD","in_stock":false},{"title":"Warranty 2 Year","offer_id":43333880119386,"sku":"BWCS-JVF808U-2","price":35.99,"currency_code":"USD","in_stock":false},{"title":"Warranty 3 Year","offer_id":43333880152154,"sku":"BWCS-JVF808U-3","price":38.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-JVF808U-big.webp?v=1778213541","url":"https:\/\/batteryweb.com\/products\/jvc-gr-d796-replacement-battery-74v-750mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}