{"product_id":"karcher-rcf-3-replacement-battery-144v-6700mah-li-ion","title":"Kärcher RCF 3 Replacement Battery 14.4V 6700mAh D099-4S2P","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eKarcher RCF 3 \/ RCV 5 — 14.4V Li-ion Replacement Battery (D099-4S2P)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 14.4V 6700mAh Li-ion battery for the Karcher RCF 3 robotic floor cleaner and RCV 5. It replaces OEM part D099-4S2P. The battery slots into the same bay and connects through the same BMS handshake as the original unit.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRCF 3 and RCV 5 compatibility:\u003c\/strong\u003e\n    Both models run a 14.4V architecture with the same connector pinout and expect the same BMS communication protocol. Swapping between them does not require any adapter or firmware change on the unit.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell pack through vacuum motor load on the RCF 3 platform. The BMS held cutoff thresholds correctly, and charge acceptance across a full depletion-to-full cycle matched rated capacity without voltage drop anomalies.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging habit for robotic vacuums:\u003c\/strong\u003e\n    The RCF 3 returns to its dock automatically, which means the battery can sit on trickle charge for days between cleaning cycles. Remove the battery or undock the unit once charging is complete — continuous dock charging accelerates capacity fade on lithium cells faster than normal cycling does.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator reaches low on the RCF 3\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens when the motor draws above its rated current — usually from a partially blocked filter or debris pickup channel. The battery voltage sags under the elevated load, and the vacuum loses suction force even though the indicator still shows charge remaining. The BMS reads pack voltage, not motor load efficiency, so the indicator lags behind actual usable capacity. Clean the filter and check the brush roll channel first; if suction restores, the battery is not the cause.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eRCF 3 motor cuts out mid-cycle then restarts on its own\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a BMS overcurrent trip, not a battery failure. When the brush roll or suction path is restricted, motor current spikes above the cell pack's safe discharge threshold and the BMS opens the circuit. The unit recovers once the BMS timer resets — typically a few seconds. If the cut-out recurs consistently, check the filter for blockage before replacing the battery. A clean filter drops motor draw back within the 14.4V pack's rated discharge window and stops the trips.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43426405941338,"sku":"BWCS-CNR809VX-1","price":68.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43426405974106,"sku":"BWCS-CNR809VX-2","price":80.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43426406006874,"sku":"BWCS-CNR809VX-3","price":88.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-CNR809VX-1.webp?v=1779933099","url":"https:\/\/batteryweb.com\/products\/karcher-rcf-3-replacement-battery-144v-6700mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}