{"product_id":"kenwood-grati-fg100-replacement-battery-24v-2200mah-ni-mh","title":"Kenwood Grati FG100 Replacement Battery 2.4V 2200mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eKenwood Grati FG100 \/ FG150 — 2.4V Ni-MH Replacement Battery (SY9541)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 2.4V, 2200mAh Ni-MH replacement battery for the Kenwood Grati FG100 and FG150 cordless food grinders. It fits the FG-100 and FG-150 variant designations as well. When the original cell degrades and the grinder loses power mid-use, this is the direct swap using OEM part number SY9541 (also cross-referenced as BF11956).\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFG100 and FG150 platform fit:\u003c\/strong\u003e\n    Both models run the same 2.4V single-cell Ni-MH pack with the same connector footprint and BMS handshake. The cell housing dimensions are 86.60 × 35.30 × 22.80mm — the same physical envelope across the FG100 and FG150 series.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through repeated grinding loads — including dry spice and hard nut passes — and confirmed the BMS holds charge correctly and the cell voltage stabilises at 2.4V under load without triggering a premature cutoff.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eContact drying after kitchen use:\u003c\/strong\u003e\n    Dry the charging contacts with a cloth before placing the unit back on charge. Steam and moisture from food preparation settle on the metal contacts and trigger a BMS protection fault that blocks charging entirely until the contacts are fully dry.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor power dropping mid-grind on the FG100\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe FG100's motor draws significantly more current when processing dense loads — whole peppercorns, hard dried spices, or packed nuts. A degraded Ni-MH cell cannot sustain the current demand, and voltage sags below the BMS cutoff threshold mid-cycle. The grinder stalls or slows noticeably before the cell is empty. A fresh 2200mAh cell at 2.4V holds voltage under that surge current long enough to complete a full grinding pass without dropout.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eGrinder won't charge after sitting unused for several months\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNi-MH cells self-discharge during storage, and if the FG100 sits unused long enough, the cell voltage can drop below the BMS re-initialisation threshold. The charger reads the cell as a fault condition and refuses to begin a charge cycle. To recover a deeply discharged cell, apply a short trickle charge using a compatible Ni-MH charger set to a low rate — this nudges the cell voltage above the BMS floor, typically around 1.0V, after which normal charging resumes.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43381277130842,"sku":"BWCS-KFG100SL-1","price":28.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43381277163610,"sku":"BWCS-KFG100SL-2","price":32.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43381277196378,"sku":"BWCS-KFG100SL-3","price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-KFG100SL-1.webp?v=1778899901","url":"https:\/\/batteryweb.com\/products\/kenwood-grati-fg100-replacement-battery-24v-2200mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}