{"product_id":"kodak-dc4800-replacement-battery-37v-2400mah-li-ion","title":"Kodak KLIC-3000 DC4800 Compatible Battery 3.7V 2400mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eKodak DC4800 \/ DC4800 Zoom — 3.7V Li-ion Replacement Battery (KLIC-3000)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.7V, 2400mAh Li-ion replacement for the Kodak KLIC-3000 battery. It fits the DC4800 and DC4800 Zoom digital cameras. Capacity is 2400mAh — confirmed from product data, not estimated.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDC4800 and DC4800 Zoom compatibility:\u003c\/strong\u003e\n    Both models run the same 3.7V single-cell architecture and share the KLIC-3000 form factor, connector pinout, and BMS handshake protocol — so one cell covers both variants without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through charge and discharge cycles on the DC4800 body. The BMS accepted the cell, the charge status indicator behaved normally, and the camera exited standby without prompting a battery rejection screen.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-cycle initialisation on the DC4800:\u003c\/strong\u003e\n    Complete one full charge cycle inside the camera body or OEM charger before shooting. The DC4800 BMS maps its battery-remaining display against a discharge curve, and it builds that curve reference on the first full cycle — skipping this causes erratic percentage readings early on.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eDead battery indicator showing on a partially charged replacement cell\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe DC4800 reads battery level by comparing measured cell voltage against a fixed threshold table calibrated to the original KLIC-3000 discharge curve. A replacement cell with a slightly different internal resistance or resting voltage can sit outside that table's expected range on first use, triggering the dead indicator even when the cell holds a charge. This is a mapping mismatch, not a faulty cell. Charge the battery fully via the OEM charger, then power the camera on — the BMS recalibrates its baseline from a known full-charge voltage of approximately 4.2V, and the indicator typically resolves after that first cycle.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBattery percentage jumping erratically during a shoot\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe DC4800 samples cell voltage at intervals and maps those samples to percentage steps. If the cell's discharge curve doesn't match the original KLIC-3000 curve exactly, the percentage can jump — dropping several steps quickly, then holding flat for a long period. This isn't capacity loss; it's the indicator misreading the voltage-to-percentage relationship. It typically settles after two or three full charge-discharge cycles as the BMS accumulates accurate voltage data. Run the battery down to auto-shutoff and recharge to 4.2V twice to stabilise the display.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43333572296794,"sku":"BWCS-RDB200FU-1","price":43.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43333572329562,"sku":"BWCS-RDB200FU-2","price":50.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43333572362330,"sku":"BWCS-RDB200FU-3","price":55.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-RDB200FU-1.webp?v=1778212955","url":"https:\/\/batteryweb.com\/products\/kodak-dc4800-replacement-battery-37v-2400mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}