{"product_id":"koobee-m3-replacement-battery-38v-2650mah-li-polymer","title":"Koobee M3 BL-53CT Replacement Battery 3.8V 2650mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eKOOBEE M3 — 3.8V Li-Polymer Replacement Battery (BL-53CT)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.8V Li-Polymer cell replaces the BL-53CT battery in the KOOBEE M3 smartphone. Capacity is 2650mAh (10.07Wh), matching the original cell specification. It fits directly into the M3 chassis using the existing connector and retaining clip.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eM3 fitment:\u003c\/strong\u003e\n    The BL-53CT connector pinout carries both the charge lines and the thermistor signal the M3 charge IC uses to monitor cell temperature. This replacement uses the same four-pin arrangement, so the charge IC receives a valid thermistor reading and does not throw a fault on first boot.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through a full discharge-charge sequence and monitored BMS cutoff thresholds at both ends. The protection circuit tripped correctly at the low-voltage floor and the charge IC terminated at 4.35V without overrun.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFuel gauge recalibration on first use:\u003c\/strong\u003e\n    After installation, run one complete discharge down to automatic shutdown, then charge uninterrupted to 100% before using the phone normally. The M3 fuel gauge IC reads coulomb counter data against a stored discharge curve — that first full cycle overwrites the old cell's curve and gives the OS accurate percentage readings.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the M3 reports wrong battery percentage after a cell swap\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe M3 uses a coulomb-counting fuel gauge IC that tracks charge in and out of the cell over time. When the original cell degrades, the IC adjusts its internal model to match that worn discharge curve. A new 2650mAh cell has a steeper, higher-capacity curve — the IC does not know this until it observes a full cycle. Until that first full discharge and charge completes, the OS pulls percentage values from a stale model, so the display may read 40% and drop to shutdown faster than expected. One uninterrupted discharge-charge cycle resets the model to the new cell.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSudden shutdown at 20–30% remaining on the replacement cell\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a voltage cliff, not a capacity fault. Under the combined load of the modem radio, screen backlight, and active apps, the cell voltage drops sharply — faster than the fuel gauge IC predicts from its uncalibrated model. When cell voltage hits the BMS low-voltage cutoff (typically 3.0V under load on a fresh Li-Polymer cell), the phone cuts power instantly even though the displayed percentage still shows a safe number. The fix is the same calibration cycle: discharge to automatic shutdown, then charge to 100% without interruption. After that cycle the IC tracks the actual voltage curve of this cell and the shutdowns stop.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43404239405146,"sku":"BWCS-KBM300SL-1","price":26.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43404239437914,"sku":"BWCS-KBM300SL-2","price":30.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43404239470682,"sku":"BWCS-KBM300SL-3","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-KBM300SL-1.webp?v=1779369448","url":"https:\/\/batteryweb.com\/products\/koobee-m3-replacement-battery-38v-2650mah-li-polymer","provider":"BatteryWeb","version":"1.0","type":"link"}