{"product_id":"kv8-510b-replacement-battery-144v-3000mah-ni-mh","title":"KV8 510B Cordless Vacuum Compatible Battery 14.4V 3000mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eKV8 510B \/ S350 — 14.4V Ni-MH Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 14.4V, 3000mAh Ni-MH battery pack for KV8 cordless vacuum models 510B and S350. It replaces the original cell when capacity has dropped to the point where the vacuum can no longer complete a full clean. Voltage and form factor match the original pack exactly.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003e510B and S350 compatibility:\u003c\/strong\u003e\n    Both models run the same 14.4V power rail, share the same physical battery housing, and use the same connector orientation. A single replacement cell covers both without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through charge and discharge cycles on the 510B platform. The BMS held steady across motor-start current spikes and did not trip under sustained suction load on a clean filter.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging on KV8 cordless vacuums:\u003c\/strong\u003e\n    Do not leave the vacuum sitting on the charging dock permanently. Ni-MH cells on continuous trickle charge develop capacity fade faster than cells charged only when depleted. Charge to full, then remove from the dock.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator reaches low\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNi-MH cells under sustained motor load show voltage sag before the pack is fully depleted. On the KV8 510B, this appears as weakening suction while the indicator still shows charge remaining. A partially clogged filter makes this worse — the motor draws above its rated current trying to compensate, which accelerates voltage sag. Clear the filter first, then test suction. If the problem persists with a clean filter, the original pack has degraded below a usable capacity threshold.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor cuts out mid-clean then recovers after a short pause\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a BMS overcurrent trip, not a motor fault. When airflow is restricted — blocked filter, full dustbin, or a lodged obstruction — the motor pulls more current than the BMS allows, and it shuts down as a protection measure. Removing the restriction lets current drop back to safe levels, and the BMS resets. Check the filter and empty the dustbin before assuming the battery is at fault. If the cutout happens with a fully clear airway, measure pack voltage at rest — a healthy Ni-MH 14.4V pack should read at or above 14.4V after a full charge.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43428047421530,"sku":"BWCS-SBR210VX-1","price":80.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43428047454298,"sku":"BWCS-SBR210VX-2","price":93.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43428047487066,"sku":"BWCS-SBR210VX-3","price":103.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-SBR210VX-1.webp?v=1779933966","url":"https:\/\/batteryweb.com\/products\/kv8-510b-replacement-battery-144v-3000mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}