{"product_id":"linak-deskline-replacement-battery-24v-2100mah-li-ion","title":"Linak BA001 Deskline Compatible Battery 24V 2100mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eLinak Deskline CBD6S \/ Homeline — 24V Li-ion Replacement Battery (BA001)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 24V, 2100mAh Li-ion replacement for the Linak BA001 battery. It fits the Deskline, CBD6S, and Homeline controller units. These controllers manage height adjustment, motor drive, and preset memory on Linak-powered standing desks.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDeskline \/ CBD6S \/ Homeline compatibility:\u003c\/strong\u003e\n    All three platforms share the same 24V controller architecture and use the BA001 cell pack. The BMS handshake, connector pinout, and voltage rail are identical across these lines — one battery covers the full group.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through full charge and discharge cycles on a CBD6S controller. The BMS accepted charge without fault flags, voltage held steady at 24V under motor-start draw, and the controller completed height adjustments across the full travel range without interruption.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePreset memory after swap:\u003c\/strong\u003e\n    The Deskline controller stores height presets in a memory module backed by this battery. Removing the old battery — even briefly — clears all saved positions. After fitting the new battery, re-program every height preset from scratch before returning the desk to use.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the CBD6S loses height memory when the battery dies\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe Deskline controller does not use non-volatile flash for height presets. It relies on the BA001 battery to hold a continuous trickle voltage to the memory module. Once that voltage drops below roughly 20V, the controller treats it as a cold start and wipes all stored positions. A battery that reads low but hasn't fully failed yet will cause intermittent preset loss — heights disappear and reappear depending on charge state. Replacing the battery resolves this; recalibrating presets afterward is mandatory.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eController not responding to up\/down inputs after battery replacement\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eAfter a battery swap, some CBD6S and Homeline units enter a locked state and ignore handset commands. This happens because the controller loses its calibrated travel reference when power is cut. To re-home it, hold the down button until the desk reaches its lowest physical stop and the controller registers a hard limit — typically indicated by a brief motor stutter. Once re-homed, normal up\/down operation and preset programming resume. If the desk still won't respond, confirm the new battery is reading at least 24V before suspecting a controller fault.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43416242946138,"sku":"BWCS-LBD600MD-1","price":194.99,"currency_code":"USD","in_stock":false},{"title":"Warranty 2 Year","offer_id":43416242978906,"sku":"BWCS-LBD600MD-2","price":228.99,"currency_code":"USD","in_stock":false},{"title":"Warranty 3 Year","offer_id":43416243011674,"sku":"BWCS-LBD600MD-3","price":254.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-LBD600MD-1.webp?v=1779761097","url":"https:\/\/batteryweb.com\/products\/linak-deskline-replacement-battery-24v-2100mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}