{"product_id":"linak-liko-viking-m-replacement-battery-24v-2500mah-ni-mh","title":"Linak Liko Viking M Replacement Battery 24V BAL20001-02","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eLinak Liko Viking M \/ Golvo 8008 — 24V Ni-MH Replacement Battery (BAL20001-02)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 24V, 2500mAh Ni-MH replacement battery for the Linak Liko Viking M patient lift and Golvo 8008 Portable Hoist. It replaces OEM part numbers BAL20001-02, 2006107, and 20001-01. The battery powers the electric motor system that drives the lift mechanism during patient transfers.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLiko Viking M and Golvo 8008 compatibility:\u003c\/strong\u003e\n    Both lifts run the same 24V Ni-MH battery platform with an identical connector and BMS handshake. The pack fits either hoist without modification — the BMS expects the same voltage rail and charge termination signal from both.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through charge and discharge on a patient lift test rig. The BMS accepted the cell without fault codes, completed its delta-V termination at full charge, and maintained steady voltage under motor-start load.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePost-installation self-test on the lift:\u003c\/strong\u003e\n    After fitting this battery, allow the Liko Viking M to complete its full power-on self-test without interruption. The device runs a BMS verification sequence at startup — cutting power during this cycle triggers a false battery fault that persists until the next clean reboot.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the Liko Viking M alarms low battery immediately after a confirmed full charge\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe lift's charge controller uses a delta-V threshold tuned to the conductance profile of a conditioned OEM cell. A brand-new Ni-MH pack has a flatter charge curve on the first cycle, so the controller can under-report state of charge even when the cell is full. The BMS learn cycle needs one complete charge-discharge before it reads the new cell accurately. Run one full cycle before clinical use and the low-battery alarm clears on its own.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eLift will not power on after the battery sat unused in storage\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNi-MH cells self-discharge at roughly 1–2% per day at room temperature. A pack that has sat in a warehouse for several months can drop below the BMS recovery threshold — typically around 18–19V on a 24V Ni-MH pack — and the lift will not initialise. Place the battery on the hoist charger and leave it for a full charge cycle without attempting to power the device. Once voltage recovers above the BMS wake threshold, the lift boots normally.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43381426749530,"sku":"BWCS-HRM107MD-1","price":106.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43381426782298,"sku":"BWCS-HRM107MD-2","price":125.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43381426815066,"sku":"BWCS-HRM107MD-3","price":139.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-HRM107MD-1.webp?v=1778900750","url":"https:\/\/batteryweb.com\/products\/linak-liko-viking-m-replacement-battery-24v-2500mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}