{"product_id":"lizard-m-v10-replacement-battery-259v-10200mah-li-ion","title":"Lizard M-V10 Replacement Battery 25.9V 10200mAh Li-ion","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eLizard M-V10 \/ Q6 \/ S2 \/ S4 — 25.9V Li-ion Replacement Battery (101-806)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 25.9V 10200mAh (264.18Wh) lithium-ion battery for Lizard cordless lawn mowers. It fits the M-V10, Q6, S2, and S4 models. It replaces OEM part numbers 101-806, 1126-9105-01, 1126-9138-01, and PA-L1022 series packs.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eM-V10, Q6, S2 and S4 compatibility:\u003c\/strong\u003e\n    These four models share the same 25.9V battery platform, connector pinout, and BMS handshake protocol. Swapping between them requires no adapters — the pack slots and communicates identically across the range.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through simulated blade-start inrush cycles on a 25.9V motor load. The BMS handled repeated high-current draws without nuisance trips, and cell balancing activated correctly at the top of charge.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eSeasonal storage tip:\u003c\/strong\u003e\n    Before the first mow of the season, bring the battery indoors overnight if temperatures are below 10°C. Cold Li-ion cells carry higher internal resistance, and the blade motor's inrush current can trip the BMS on a pack that hasn't warmed to room temperature.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBMS cutoff on thick-grass and wet-grass blade load\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe blade motor on the M-V10 and related models draws a sharp inrush current at startup and again when it bites into dense or wet grass. If the BMS reads that spike as exceeding its protection threshold, it shuts the pack down mid-cut. This is not a battery fault — it is the protection circuit doing its job. Let the mower sit for 30 seconds before restarting, and if cutouts repeat, check that the blade is sharp and the grass height is within the mower's rated cutting range.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCharger refusing to accept the pack after winter storage\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eIf the mower sat in an unheated garage all winter, individual cells may have self-discharged below the charger's acceptance voltage — typically around 20V for a 25.9V pack. Most standard chargers see a pack below this threshold as faulty and refuse to begin a charge cycle. The fix is to use a charger with a recovery or wake-up mode, or connect the pack briefly to a compatible charger that applies a low-current pre-charge pulse. Once cells climb back above 22V, the charger will recognise the pack and proceed normally.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43381279653978,"sku":"BWCS-ABL510VX-1","price":164.99,"currency_code":"USD","in_stock":false},{"title":"Warranty 2 Year","offer_id":43381279686746,"sku":"BWCS-ABL510VX-2","price":195.99,"currency_code":"USD","in_stock":false},{"title":"Warranty 3 Year","offer_id":43381279719514,"sku":"BWCS-ABL510VX-3","price":218.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-ABL510VX-1.webp?v=1778899901","url":"https:\/\/batteryweb.com\/products\/lizard-m-v10-replacement-battery-259v-10200mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}