{"product_id":"lubluelu-sl61-replacement-battery-144v-2600mah-li-ion","title":"Lubluelu SL61 Replacement Battery 14.4V 2600mAh Li-ion","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003elubluelu SL61 \/ SL60D \/ SL60 Plus \/ SL68 — 14.4V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 14.4V 2600mAh Li-ion replacement battery for the lubluelu SL61, SL60D, SL60 Plus, and SL68 cordless stick vacuums. It restores power to the motor when the original cell degrades. Voltage and physical dimensions match the OEM pack: 69.00 × 37.30 × 37.00mm.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSL60 and SL61 platform compatibility:\u003c\/strong\u003e\n    The SL60D, SL60 Plus, SL61, and SL68 share the same 14.4V battery rail, connector housing, and BMS communication protocol — which is why one cell fits all four models without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through charge cycles on the SL61 dock and monitored BMS cutoff behaviour. The protection circuit tripped correctly on over-discharge and reset cleanly on reconnection to the charger.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging habit on this vacuum:\u003c\/strong\u003e\n    Do not leave the SL61 sitting on the dock continuously between uses. These vacuums charge to full in roughly two hours — once the indicator shows full, remove it. Permanent dock contact forces a trickle-charge state that accelerates capacity fade on Li-ion cells.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator reaches low on the SL61\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens when the motor is drawing more current than the battery can deliver at its present state of charge — even if the indicator still shows two bars. On the SL61, a partially blocked filter or full dust cup raises motor load significantly. The battery voltage sags under that extra draw, and suction weakens before the BMS would normally flag a low-charge event. Clean the filter and empty the cup first; if suction recovers, the battery is fine. If it still sags with a clean filter, the cell is losing capacity and voltage is dropping below 12V under load.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor cuts out mid-clean then restarts after a short pause\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a BMS overcurrent trip, not a flat battery. When suction is restricted — blocked brush roll, clogged filter, or dense carpet pile — the motor pulls sustained current above the protection circuit threshold. The BMS cuts power to prevent cell damage. After 10–15 seconds the pack cools slightly, the BMS resets, and the motor starts again. Clear the blockage, check that the filter is seated correctly, and retry. If the trip repeats on a clean machine, check pack voltage under load — it should hold above 13V during normal operation.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43426431074394,"sku":"BWCS-TRQ550VX-1","price":43.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43426431107162,"sku":"BWCS-TRQ550VX-2","price":51.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43426431139930,"sku":"BWCS-TRQ550VX-3","price":56.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-TRQ550VX-1.webp?v=1779933316","url":"https:\/\/batteryweb.com\/products\/lubluelu-sl61-replacement-battery-144v-2600mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}